Symantec ST0-10X 인증시험

성공을 위해 길을 찾고 실패를 위해 구실을 찾지 않는다는 말이 있습니다. Symantec인증 ST0-10X시험이 영어로 출제되어 시험패스가 너무 어렵다 혹은 회사다니느라 공부할 시간이 없다는 등등은 모두 공부하기싫은 구실에 불과합니다. ITExamDump의 Symantec인증 ST0-10X덤프만 마련하면 실패를 성공으로 바꿀수 있는 기적을 체험할수 있습니다.제일 간단한 방법으로 가장 어려운 문제를 해결해드리는것이ITExamDump의 취지입니다.

ITExamDump는 여러분이 Symantec인증ST0-10X시험 패스와 추후사업에 모두 도움이 되겠습니다.ITExamDump제품을 선택함으로 여러분은 시간과 돈을 절약하는 일석이조의 득을 얻을수 있습니다. Symantec인증ST0-10X 인증시험패스는 아주 어렵습니다. 자기에 맞는 현명한 학습자료 선택은 성공의 지름길을 내딛는 첫발입니다. 퍼펙트한 자료만이Symantec인증ST0-10X시험에서 성공할수 있습니다. ITExamDump시험문제와 답이야 말로 퍼펙트한 자료이죠. ITExamDump Symantec인증ST0-10X인증시험자료는 100% 패스보장을 드립니다

저희는 수많은 IT자격증시험에 도전해보려 하는 IT인사들께 편리를 가져다 드리기 위해 Symantec ST0-10X실제시험 출제유형에 근거하여 가장 퍼펙트한 시험공부가이드를 출시하였습니다. 많은 사이트에서 판매하고 있는 시험자료보다 출중한ITExamDump의 Symantec ST0-10X덤프는 실제시험의 거의 모든 문제를 적중하여 고득점으로 시험에서 한방에 패스하도록 해드립니다. Symantec ST0-10X시험은ITExamDump제품으로 간편하게 도전해보시면 후회없을 것입니다.

시험 번호/코드: ST0-10X

시험 이름: Symantec (Veritas Storage Foundation 5 for Unix (STS))

지금 같은 상황에서 몇년간Symantec ST0-10X시험자격증만 소지한다면 일상생활에서많은 도움이 될것입니다. 하지만 문제는 어떻게Symantec ST0-10X시험을 간단하게 많은 공을 들이지 않고 시험을 패스할것인가이다? 우리ITExamDump는 여러분의 이러한 문제들을 언제드지 해결해드리겠습니다. 우리의ST0-10X시험마스터방법은 바로IT전문가들이제공한 시험관련 최신연구자료들입니다. 우리ITExamDump 여러분은ST0-10X시험관련 최신버전자료들을 얻을 수 있습니다. ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.

ST0-10X 덤프무료샘플다운로드하기: http://www.itexamdump.com/ST0-10X.html

NO.1 You have installed Storage Foundation 5.0 Standard server with a number of hosts. You want to
centrally monitor and manage the hosts. You also want to generate reports for the hosts and the storage
resources that the hosts consume. What should you do?
A.Install the Veritas Quick I/O option on Storage Foundation 5.0 server.
B.Install Veritas Storage Foundation Management Server on Storage Foundation 5.0 server.
C.Install Veritas Storage Foundation Management Host on Storage Foundation 5.0 server.
D.Upgrade Storage Foundation 5.0 Standard to Storage Foundation 5.0 Enterprise.
Answer: B

Symantec dumps   ST0-10X pdf   ST0-10X자격증   ST0-10X자료

NO.2 Which form of Disk Spanning allows you to map data in equally-sized chunks alternating across
multiple disks and is also known as interleaving?
A.Striping
B.Concatenation
C.Mirroring
D.Parity
Answer: A

Symantec   ST0-10X덤프   ST0-10X자료

NO.3 Which physical storage device is the equivalent to a virtual volume?
A.A disk
B.A partition
C.A block
D.A directory
Answer: B

Symantec   ST0-10X자료   ST0-10X기출문제   ST0-10X기출문제

NO.4 What is the default limit to the number of subdisks that can be attached to a single plex?
A.1024
B.2048
C.4096
D.Unlimited
Answer: C

Symantec   ST0-10X   ST0-10X최신덤프   ST0-10X   ST0-10X pdf

NO.5 How many free partitions do you need to encapsulate a boot disk?
A.1
B.2
C.3
D.4
Answer: B

Symantec인증   ST0-10X dumps   ST0-10X   ST0-10X기출문제

NO.6 You are auditing a current storage environment that is not utilizing storage tiering. The information
gained from the audit is to be used in a new storage tiering design that will have 4 tiers (Tiers 1-4). You
need to determine the location for archive data which needs to be accessible but is not used heavily.
Where should you store this data?
A.Tier 1: High-end storage arrays with fast, reliable network connections.
B.Tier 2: High-end arrays, but performance is not a priority.
C.Tier 3: Mid-range to low-end storage arrays with fast, reliable network connections.
D.Tier 4: low-cost media, such as tape, with little consideration given to performance.
Answer: C

Symantec   ST0-10X자격증   ST0-10X   ST0-10X최신덤프   ST0-10X

NO.7 What is the minimum number of plexes required for true mirroring to provide redundancy of data?
A.One
B.Two
C.Three
D.Four
Answer: B

Symantec   ST0-10X기출문제   ST0-10X기출문제   ST0-10X덤프   ST0-10X

NO.8 You need to create a volume for the HR department. You need to mount a file system with a high
demand for I/O throughput. You are aware that spanning the volume across multiple disks will increase
the I/O performance. Which risk should you be aware of when spanning the volume across multiple
disks?
A.Write throughput degradation
B.Single disk failure causes volume failure
C.Requirement for disk redundancy
D.Poor I/O performance
Answer: B

Symantec   ST0-10X   ST0-10X dumps   ST0-10X시험문제   ST0-10X기출문제

NO.9 Which structure records are stored in the private region? (Each correct Answer presents part of the
solution. Select three.)
A.Disk group configuration
B.Disk and disk group ID
C.File system metadata
D.Disk group kernel log
E.Partition tables
Answer: ABD

Symantec인증   ST0-10X기출문제   ST0-10X   ST0-10X자격증   ST0-10X시험문제

NO.10 Which two restrictions does relayout place on the administration of a volume while it is in progress?
(Select two.)
A.During a relayout, you cannot create a sparse plex.
B.During a relayout, you cannot change the number of mirrors in a volume.
C.During a relayout, you cannot change the number of subdisks in a volume.
D.During a relayout, you cannot create a snapshot of a volume.
E.During a relayout, you cannot create a backup of a volume.
Answer: AD

Symantec기출문제   ST0-10X기출문제   ST0-10X   ST0-10X자격증

NO.11 Which three are the database agents that are supported by Storage Foundation High Availability
version? (Select three.)
A.Informix
B.DB/2
C.Ingress
D.Oracle
E.Sybase
F.SQL
Answer: BDE

Symantec   ST0-10X pdf   ST0-10X인증   ST0-10X   ST0-10X시험문제

NO.12 You are working with the Storage Foundation Intelligent Storage Provisioning feature, to create a new
mirrored volume. To prevent system failure, you want to ensure that you are able to perform a recovery of
mirrored volumes in minimum response time.
What should you do?
A.Create a Dirty Region Log.
B.Create a Data Change Map log.
C.Create a RAID-5 log.
D.Create a Snap object log.
Answer: A

Symantec   ST0-10X   ST0-10X최신덤프   ST0-10X

NO.13 You are responsible for administering the Storage Foundation for Sybase server. You want to remove a
mounted volume. What should you do first to ensure you are able to remove the mounted volume?
A.Remove the snapshot from the associated volume.
B.Recursively remove all plexes and subdisks.
C.Disassociate the snapshot from the associated volume.
D.Unmount the file system.
Answer: B

Symantec   ST0-10X   ST0-10X자료   ST0-10X기출문제   ST0-10X자료

NO.14 Which command will you use to determine the operating mode of vxconfigd?
A.vxdctl enable
B.vxdctl mode
C.vxmode
D.ps -ef |grep vxconfig
Answer: B

Symantec자료   ST0-10X dump   ST0-10X자료   ST0-10X기출문제   ST0-10X

NO.15 You are monitoring a file system on a Solaris operating system using Veritas Volume Manager when
the following kernel message appears: WARNING: msgcnt x: mesg 069: V-2-69: memory usage specified
by the vxfs:vxfs_ninode and vxfs:vx_bc_bufhwm parameters exceeds available memory; the system may
hang under heavy load. You need to resolve this error. What should you do?
A.Increase the value of one or both parameters to 100% of physical memory or to 100% of kernel virtual
memory
B.Remove either the physical memory parameter or the kernel virtual memory parameter.
C.Leave the parameters at current levels and disregard the system message because it is a false
message.
D.Reduce the value of one or both parameters to less than 50% of physical memory or to 66% of kernel
virtual memory
Answer: D

Symantec   ST0-10X   ST0-10X dumps   ST0-10X dumps   ST0-10X

NO.16 You place six physical disks under Volume Manager control to create 10GB of volume. You want to
use this volume as an archive directory. You need to create a volume that will store three copies of the
archived data. Which command will you use to create a volume with three plexes?
A.vxassist make archivevol 30g layout=stripe-mirror nmirror=3
B.vxassist make archivevol 30g layout=stripe-mirror ncolumn=3
C.vxassist make archivevol 10g layout=stripe-mirror nmirror=3
D.vxassist make archivevol 10g layout=stripe-mirror ncolumn=3
Answer: C

Symantec자격증   ST0-10X dumps   ST0-10X dump   ST0-10X

NO.17 You have large number of mirrored volumes, and the resynchronization process on mirrored volumes
will take lot of time. You want to address enable Dirty Region Logging (DRL) and find out the cause why it
takes a long time for resynchronization. You want to check the status of DRL logging to see if it is already
enabled.
How will you accomplish this task?
A.Use the vxprint command with the -F%drllogging $DCOVOL option
B.Use the vxprint command with the -F%drllogging $DRLVOL option
C.Use the vxprint command with the -F%dcologging $DCOVOL option
D.Use the vxprint command with the -F%drllogging $$DCONAME option
Answer: D

Symantec dumps   ST0-10X최신덤프   ST0-10X   ST0-10X자격증   ST0-10X

NO.18 The vxprint command output for volume vol07 indicates that it has three plexes. How will you
determine which plexes are used for data?
A.Note the lengths. Data plexes are all the same length.
B.Note the STATE field. Non-data plexes will be indicated by the value: LOG.
C.Note the STATE field. Data plexes will be indicated by the value: MIRROR.
D.Note the RECORD TYPE field. Data plexes are designated with PL.
Answer: B

Symantec인증   ST0-10X   ST0-10X   ST0-10X dumps

NO.19 The 'Administer' button in the Storage Foundation Management Server user interface for a host is
continually red, and the vxsvc32 agent is listed as DOWN.
How do you solve this problem?
A.Reconfigure the Storage Foundation management Server.
B.Reinstall the agent.
C.Restart Storage Foundation Management Server.
D.Change the types.ini configuration file on the Central Management Server.
Answer: D

Symantec dumps   ST0-10X   ST0-10X dumps   ST0-10X자격증   ST0-10X   ST0-10X

NO.20 You want to allow non-layered volume to change to layered stripe-mirror volume while remaining online.
What is the correct procedure to perform this conversion?
A.Convert the volume, stop the volume, remount the file system, and start the volume.
B.Unmount the file system, stop the volume, convert the volume, start the volume, and remount the file
system.
C.Resync the volume, convert the volume, and mirror the volume.
D.Stop the volume and then convert the volume.
Answer: C

Symantec   ST0-10X   ST0-10X   ST0-10X인증

ITExamDump이 바로 아주 좋은Symantec ST0-10X인증시험덤프를 제공할 수 있는 사이트입니다. ITExamDump 의 덤프자료는 IT관련지식이 없는 혹은 적은 분들이 고난의도인Symantec ST0-10X인증시험을 패스할 수 있습니다. 만약ITExamDump에서 제공하는Symantec ST0-10X인증시험덤프를 장바구니에 넣는다면 여러분은 많은 시간과 정신력을 절약하실 수 있습니다. 우리ITExamDump 의Symantec ST0-10X인증시험덤프는 ITExamDump전문적으로Symantec ST0-10X인증시험대비로 만들어진 최고의 자료입니다.