Microsoft인증 070-662시험준비중이신 분들은Microsoft인증 070-662시험통과가 많이 어렵다는것을 알고 있을것입니다. 학교공부하랴,회사다니랴 자격증공부까지 하려면 너무 많은 정력과 시간이 필요할것입니다. 그렇다고 자격증공부를 포기하면 자신의 위치를 찾기가 힘들것입니다. ITExamDump 덤프는 IT인증시험을 대비하여 제작된것이므로 시험적중율이 높아 다른 시험대비공부자료보다 많이 유용하기에 IT자격증을 취득하는데 좋은 동반자가 되어드릴수 있습니다. ITExamDump 덤프를 사용해보신 분들의 시험성적을 통계한 결과 시험통과율이 거의 100%에 가깝다는 놀라운 결과를 얻었습니다.
Microsoft인증 070-662시험을 패스하여 자격증을 취득하는게 꿈이라구요? ITExamDump에서 고객님의Microsoft인증 070-662시험패스꿈을 이루어지게 지켜드립니다. ITExamDump의 Microsoft인증 070-662덤프는 가장 최신시험에 대비하여 만들어진 공부자료로서 시험패스는 한방에 끝내줍니다.
경쟁율이 치열한 IT업계에서 아무런 목표없이 아무런 희망없이 무미건조한 생활을 하고 계시나요? 다른 사람들이 모두 취득하고 있는 자격증에 관심도 없는 분은 치열한 경쟁속에서 살아남기 어렵습니다. Microsoft인증 070-662시험패스가 힘들다한들ITExamDump덤프만 있으면 어려운 시험도 쉬워질수 밖에 없습니다. Microsoft인증 070-662덤프에 있는 문제만 잘 이해하고 습득하신다면Microsoft인증 070-662시험을 패스하여 자격증을 취득해 자신의 경쟁율을 업그레이드하여 경쟁시대에서 안전감을 보유할수 있습니다.
시험 번호/코드: 070-662
시험 이름: Microsoft (TS: Microsoft Exchange Server)
IT인증자격증만 소지한다면 일상생활에서 많은 도움이 될것입니다. 하지만 문제는 어떻게 간단하게 시험을 패스할것인가 입니다. ITExamDump는 IT전문가들이 제공한 시험관련 최신 연구자료들을 제공해드립니다.ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다. ITExamDump의Microsoft 인증070-662시험대비 덤프로Microsoft 인증070-662시험을 패스하세요.
ITExamDump는 고객님의 IT자격증취득의 작은 소원을 이루어지게 도워드리는 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. ITExamDump 표 Microsoft인증070-662시험덤프가 있으면 인증시험걱정을 버리셔도 됩니다. ITExamDump 표 Microsoft인증070-662덤프는 시험출제 예상문제를 정리해둔 실제시험문제에 가장 가까운 시험준비공부자료로서 공을 들이지않고도 시험패스가 가능합니다.
Microsoft인증 070-662시험을 패스하기 위하여 잠을 설쳐가며 시험준비 공부를 하고 계신 분들은 이 글을 보는 즉시 공부방법이 틀렸구나 하는 생각이 들것입니다. ITExamDump의Microsoft인증 070-662덤프는 실제시험을 대비하여 제작한 최신버전 공부자료로서 문항수도 적합하여 불필요한 공부는 하지 않으셔도 되게끔 만들어져 있습니다.가격도 착하고 시험패스율 높은ITExamDump의Microsoft인증 070-662덤프를 애용해보세요. 놀라운 기적을 안겨드릴것입니다.
ITExamDump의Microsoft인증070-662자료는 제일 적중률 높고 전면적인 덤프임으로 여러분은 100%한번에 응시로 패스하실 수 있습니다. 그리고 우리는 덤프를 구매 시 일년무료 업뎃을 제공합니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는Microsoft인증070-662시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.
070-662 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-662.html
NO.1 You have an Exchange Server 2010 Service Pack1 (SP1) organization. The organization contains the
servers configured as shown in the following table
The Mailbox servers are members of a database availability group (DAG) named DAG1.The organization
also has a load balancing solution for Client Access. The load balancing solution has a
virtual IP address that is available by using the mail.contoso.com host name.
You create a new Client Access array that uses the outlook.contoso.com fully qualified name (FQFN)
You need to ensure that all users connect to outlook.contoso.com from Microsoft Outlook 2010.
Which Windows Powershell should you run
A. Set-MailbxDatabaseCopy
B. New-DatabaseAvailabilityGroup
C. Set-MailboxServer
D. Set-ClientAccessServer
E. New-PublicMailboxDatabase
F. New-PublicFolderDatabase
G. Set-ClientAccessArray
H. Add-MailboxDatabaseCopy
I. Set-DatabaseAvailabilityGroup
J. Set-PublicFolderDatabae
K. Add-RoleGroupMember
L. Add-DatabaseAvailabilityGroupServer
M. Set-MailboxDatabase
Answer: M
Microsoft자료 070-662 070-662 070-662 dump
NO.2 You have an Exchange organization. All servers in the organization have Exchange Server 2010
SP1installed.The organization contains a distribution group named Group1.You need to ensure that a
user named User1 can review and approve all messages sent to Group1.What should you do?
A. Modify the Managed By list for Group1.
B. Create a new journal rule and specify user1 as the journal recipient.
C. Modify the mail flow settings for User1.
D. Modify the mail flow settings for Group1.
Answer: D
Microsoft시험문제 070-662 dump 070-662인증 070-662
NO.3 You have an Exchange organization. All servers in the organization have Exchange Server 2010 SP1
installed.
You need to ensure that each user who sends a meeting request to a room mailbox receives a custom
message from the mailbox.
What should you do from the properties of the mailbox?
A. Configure the Mailbox Features settings.
B. Configure the Mail Flow settings.
C. Enable the Resource Booking Attendant.
D. Configure the Resource Information settings.
E. Configure the Resource In-Policy Requests settings.
F. Configure the Resource Out-of-policy Requests settings.
G. Configure the Account settings.
H. Configure the Resource Policy settings.
Answer: D
Microsoft인증 070-662 070-662인증 070-662자료
NO.4 You have an Exchange organization. All servers in the organization have Exchange Server 2010 SP1
installed.
You need to ensure that an equipment mailbox can be scheduled for meetings that occur during working
hours only.
What should you do from the properties of the mailbox?
A. Configure the Mailbox Features settings.
B. Configure the Resource Policy settings.
C. Enable the Resource Booking Attendant.
D. Configure the Resource In-Policy Requests settings.
E. Configure the Mail Flow settings.
F. Configure the Account settings.
G. Configure the Resource Out-of-Policy Requests settings.
H. Configure the Resource Information settings.
Answer: B
Microsoft 070-662 dump 070-662 pdf 070-662
NO.5 You have a hosted Exchange organization. All servers in the organization have Exchange Server 2010
SP1 installed.
You need to group a set of users for administrative delegation.
What should you create?
A. A new distribution group
B. A new management role
C. a managed folder mailbox policy
D. a new role assignment
Answer: D
Microsoft 070-662덤프 070-662인증 070-662 070-662
NO.6 You have an Exchange Server 2010 Service Pack 1 (SP1) organization named fabrikam.com A partner
company has an Exchange Server 2010 Service Pack 1 (SP1) organization named contoso.com. You
plan to implement federated delegation between fabrikam.com and contoso.com. You need to identify
which DNS records must be created to support federated delegation. Which DNS records should you
identify? (Choose all that apply.)
A. Host (A)
B. Mail exchanger (MX)
C. Host information (HINFO)
D. Text (TXT)
E. Mail group (MG)
Answer: AD
Microsoft 070-662기출문제 070-662 070-662 070-662
NO.7 Your network contains an Active Directory domain named contoso.com. You have an Exchange Server
2010 Service Pack 1 (SP1) organization. External users access their email by Outlook Web Apps. On you
need to ensure that the external users can log on to Outlook Web App without specifying a domain name.
Which cmdlet should you use?
A. Set-OrganizationConfig
B. Set-OwaVirtualDirectory
C. New-OrganizationRelationShip
D. New-OwaMailboxPolicy
Answer: B
Microsoft 070-662자격증 070-662 pdf
NO.8 Your network contains two Active Directory forests named contoso and nwtraders. The contoso forest
contains Exchange 2003 SP2 Servers. The nwtraders forest contains Exchange 2010 SP1 Servers.
You need to move all mailboxes from contoso to nwtraders.
What should you do from nwtraders forest?
A. Create a mail enabled contact for each mailbox in contoso. Run the Move-Mailbox cmdlet.
B. Create a mail enabled user for each mailbox in contoso. Run the New-MoveRequest cmdlet.
C. Create a linked mailbox for each mailbox in contoso. Run Move-Mailbox cmdlet.
D. Create a shared mailbox for each mailbox in contoso. Run the New-MoveRequest cmdlet.
Answer: B
Microsoft인증 070-662 070-662덤프 070-662자격증 070-662
NO.9 Your network contains an Active Directory domain named contoso.com. All domain controllers run
Windows Server 2008 R2.You have a server named Server1 that runs Windows Server 2008 R2 Service
Pack 1 (SP1).You plan to install the following Exchange Server 2010 SP1 server roles on
Server1:-Mailbox-Client Access-Hub Transport
You need to prepare Served for the planned installation. You import the Server Manager module for
Windows Power Shell.
What should you do next?
A. From Windows PowerShell, run add-windowsfeature net-framework,rsat,adlds.
B. At the command prompt, run servermanagercmd and use the Exchange-Typical.xml template.
C. From Windows PowerShell, run add-windowsfeature net-framework. From the Exchange Server 2010
installation program, select the Automatically install Windows Server roles and features required for
Exchange Server check box.
D. At the command prompt, run servermanagercmd and use the Exchange-Elase.xml template.
E. At the command prompt, run setup /pl. From the Exchange Server 2010 installation program, select the
Automatically install Windows Server roles and features required for Exchange Server check box.
F. From Windows PowerShell, run add-windowsfeature
net-framework,rsat-adds,web-server,web-basic-auth.
Answer: C
Microsoft최신덤프 070-662 070-662 070-662인증
NO.10 You have an Exchange Server 2010 Service Pack1 organization. The Organization contains a Hub
Transport server named Server1 and an Edge Transport sever named server2.
All servers are configured to use an internal DNS named DNS1 for host resolution.
You configure an Edge Subscription from Server1 to Server2.
You need to modify the delayed acknowledgment (ACK) setting of Server2.
What should you do?
A. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
B. From the Exchange Management Console (EMC), create a transport rule.
C. From the Exchange Management Shell, run the Set-TransportServer cmdlet.
D. From the Exchange Management Shell, run the Set-ReceiveConnector cmdlet.
E. From the Exchange Management Console (EMC), disable the IP Block List feature.
F. From the Exchange Management Shell, run the Set-TransportAgent cmdlet.
G. From the Exchange Management Shell, run the Set-TransportConfig cmdlet.
H. From the Exchange Management Console (EMC), modify the properties of the remote domain.
Answer: D
Microsoft덤프 070-662 070-662 dumps 070-662 dumps
NO.11 Your network contains an Active Directory domain. The domain contains one site.
You have an Exchange Server 2010 Service Pack 1 (SP1) organization that contains two Client
Accessservers, two Hub Transport servers, and three Mailbox servers.
The mailbox servers are members of a database availability group (DAG) named DAG1.
You have a mailbox database named DB1.You configure two mailbox database copies of DB1.You verify
that both mailbox database copies have a status of Healthy.
You need to ensure that an administrator is notified when the health status of a mailbox database
copychanges.
What should you run from the Exchange Management Shell?
A. Test-WebServicesConnectivity
B. Test-SystemHealth
C. Test-AvailabilityService
D. checkdatabaseredundancy.ps1
E. Test-ReplicationHealth
F. Test-SmtpConnectivity
G. Get-MailboxDataboxCopyStatus
H. Retry-Queue
I. Test-MailFlow
J. Get-MailboxDatabase
K. Test-SenderId
L. Get-SenderIdConfig
M. Test-MapiConnectivity
N. Test-OutlookWebServices
Answer: D
Microsoft 070-662 070-662 dump 070-662최신덤프 070-662
NO.12 You have an Exchange Server 2010 Service Pack1 organization. The Organization contains a
HubTransport server named Server1 and an Edge Transport sever named server2.All servers are
configured to use an internal DNS named DNS1 for host resolution.
You configure an Edge Subscription from Server1 to Server2.You deploy a monitoring server named
ServerApp1. ServerApp1 will send email notification toadministrators.
You need to ensure that ServerApp1 can relay email to the administrators through Server1.
What should you do?
A. From the Exchange Management Shell, run the Set-TransportServer cmdlet.
B. From the Exchange Management Shell, run the Set-TransportConfig cmdlet.
C. From the Exchange Management Console (EMC), create a transport rule.
D. From the Exchange Management Console (EMC), modify the properties of the remote domain.
E. From the Exchange Management Shell, run the Set-receiveConnector cmdlet.
F. From the Exchange Management Console (EMC), disable the IP Block List feature.
G. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
H. From the Exchange Management Shell, run the Set-TransportAgent cmdlet.
Answer: E
Microsoft덤프 070-662최신덤프 070-662덤프
NO.13 You are a network administrator for a company named Contoso, Ltd. Contoso has an Exchange Server
2010 Service Pack 1 (SP1) organization named contoso.com. The organization contains the following
Exchange servers: -Two Hub Transport servers -Two Edge Transport servers that have Edge
Subscriptions Contoso merges with another company named Fabrikam, Inc. Fabrikam has an Exchange
Server 2010 SP1 organization that uses the fabrikam.com SMTP domain.
All mail exchange (MX) records for fabrikam.com point to the contoso.com Edge Transport servers.
You deploy a solution for Contoso to journal all email messages by using Hub Transport rules.
You need to ensure that all email messages received by fabrikam.com users from the Internet are
journaled by the contoso.com Exchange organization.
What should you do?
A. From the Exchange Management Shell, run the new-accepteddornain -domaintypeinternalrelay
command.
B. From the Exchange Management Shell, run the new-sendconnector -addressspaces fabrikam.com
command.
C. From the Exchange Management Console (EMC), create an accepted domain that uses the
authoritative domain type.
D. From the Exchange Management Shell, run the new-receiveconnector -partner command.
E. From the Exchange Management Shell, run the new-accepteddornain -domaintypeexternalrelay
command.
F. From the Exchange Management Console (EMC), create an accepted domain that uses the internal
relay domain type.
Answer: C
Microsoft자료 070-662 070-662시험문제 070-662
NO.14 You have an Exchange Server 2010 Service Pack 1 (SP1) organization. The SMTP domain for
theorganization is contoso.com.
You enable the Exchange anti-spam features. You need to specify a quarantine mailbox for the Exchange
organization.
What should you do?
A. From the Exchange Management Console (EMC), modify the Content Filter agent.
B. Run the Set-ContentFilterConfig cmdlet from the Exchange Management Shell.
C. Run the Set-TransportConfig cmdlet from the Exchange Management Shell.
D. From the Exchange Management Console (EMC), modify the Recipient Filter agent.
E. Run the New-TransportRule cmdlet from the Exchange Management Shell.
F. Run the Set-OrganizationConfig cmdlet from the Exchange Management Shell.
G. From the Exchange Management Console (EMC), modify the Sender Filter agent.
H. Run the New-JournalRule cmdlet from the Exchange Management Shell.
Answer: B
Microsoft 070-662 dumps 070-662자료 070-662 070-662 070-662
NO.15 You have an Exchange Server 2010 Service Pack 1 (SP1) Mailbox server named Server1.You need to
ensure that a copy of each email message modified or deleted by a user named User1 isretained on
Server1.
What should you do?
A. Create a personal tag.
B. Enable single item recovery.
C. Enable message tracking
D. Enable a litigation hold
E. Create a retention policy
F. Create a journal rule
Answer: D
Microsoft 070-662시험문제 070-662 dumps
NO.16 You have an Exchange Server 2010 Service Pack 1 (SP1) organization named contoso.com.
All users access their mailbox by using Microsoft Outlook 2010.You need to ensure that the users can
prevent sensitive email messages from being forwarded to otherrecipients.
What should you first?
A. Configure Transport Layer Security (TLS) on all Send connectors
B. Install Active Directory Rights Management Services (AD RMS).
C. Run the Set-TransportConfig cmdlet.
D. Deploy Secure MIME.
Answer: B
Microsoft dump 070-662 070-662 070-662자격증 070-662 dumps 070-662 pdf
NO.17 The network contains an Active Directory domain. The domain contains one site.
You have an Exchange Server 2010 Service Pack 1 (SP1) organization that contains two Client Access
servers, two Hub Transport servers, and users report that they fail to receive email messages from the
Internet.
You review the message tracking logs and discover that the organization failed to receive any email
messages from the Internet during the past hour.
You need to identify what is prevening the hub Transport servers from receiving email messages.
What should run from the Exchange Management Shell?
A. Test-WebServicesConnectivity
B. Test-MailFlow
C. Get-MailboxDatabase
D. Test-MapiConnectivity
E. Test-ReplicationHealth
F. Test-AvailabilityService
G. Get-SenderIdConfig
H. Test-SMTPConnectivity
I. Checkdatabaseseredundancy.ps1
J. Retry-Queue
K. Test-SenderID
L. Get-MailboxDatabaseCopyStatus
M. Test-SystemHealth
N. Test-OutlookWebServices
Answer: H
Microsoft dumps 070-662 070-662덤프 070-662자료 070-662
NO.18 Your company has two offices. Each office is configured as an Active Directory site. The offices connect
to each other by using a congested WAN link. Each office has a direct, high-speed connection to the
Internet. Each site contains two Exchange Server 2010 Service Pack 1 (SP1) Hub Transport servers. You
need to ensure that email messages sent to the Internet from the Exchange organization are neverrouted
over the WAN link.
What should you do from each site?
A. From the Exchange Management Shell, run the Set-TransportConfig crndlet
B. From the Exchange Management Console (EMC), modify the properties of the accepted domain
C. From the Exchange Management Shell, run the Set-SendConnector cmdlet
D. From the Exchange Management Console (EMC), modify the properties of the Receive connector
E. From the Exchange Management Console (EMC), modify the properties of the Send connector
F. From the Exchange Management Console (EMC), modify the properties of the remote domain
G. From the Exchange Management Shell, run the Set-ForeignConnector cmdlet
H. From the Exchange Management Shell, run the Set-TransportAgent cmdlet
Answer: C
Microsoft 070-662 070-662 pdf 070-662
NO.19 You have an Exchange Server 2010 Service Pack1 (SP1) organization. The organization contains the
servers configured as shown in the following table
The Mailbox servers are members of a database availability group (DAG) named DAG1.
You need to configure DAG1 to use a static DAG IP 192.168.1.100
Which Windows PowerShell cmdlet should you run?
A. Set-MailboxServer
B. Set-DatabaseAvailabilityGroup
C. New-DatabaseAvailabilityGroup
D. Add-MailboxDatabaseCopy
E. Add-DatabaseAvailabilityGroupServer
F. Set-MailboxDatabase
G. Set-ClientAccessServer
H. Set-ClientAccessArray
I. Set-PublicFolderDatabae
J. New-PublicFolderDatabase
K. Add-RoleGroupMember
L. Set-MailbxDatabaseCopy
M. New-MailboxDatabase
Answer: B
Microsoft 070-662 pdf 070-662덤프 070-662
NO.20 Your network contains an Active Directory forest named fabrikam.com. The forest contains an
Exchange Server 2010 Service Pack 1 (SP1) organization.
All client computers run Microsoft Office Outlook 2003.A server named Ex1 hosts all public folders. You
upgrade all of the client computers to Outlook 2010.You need to remove all of the public folders from Ex1.
What should you do first.?
A. Modify the offline address book (OAB) distribution settings.
B. Modify the properties of the mailbox database.
C. Delete all of the public folders from the public folder database.
D. Perform an offline defragmentation of the public folder database files.
Answer: A
Microsoft기출문제 070-662 070-662자격증 070-662기출문제 070-662
Microsoft 070-662인증시험은 전문적인 관련지식을 테스트하는 인증시험입니다. ITExamDump는 여러분이Microsoft 070-662인증시험을 통과할 수 잇도록 도와주는 사이트입니다. 여러분은 응시 전 저희의 문제와 답만 잘 장악한다면 빠른 시일 내에 많은 성과 가 있을 것입니다.
댓글 없음:
댓글 쓰기