IT인증시험문제는 수시로 변경됩니다. 이 점을 해결하기 위해ITExamDump의Microsoft인증 70-433덤프도 시험변경에 따라 업데이트하도록 최선을 다하고 있습니다.시험문제 변경에 초점을 맞추어 업데이트를 진행한후 업데이트된Microsoft인증 70-433덤프를 1년간 무료로 업데이트서비스를 드립니다.
ITExamDump의 경험이 풍부한 IT전문가들이 연구제작해낸 Microsoft인증 70-433덤프는 시험패스율이 100%에 가까워 시험의 첫번째 도전에서 한방에 시험패스하도록 도와드립니다. Microsoft인증 70-433덤프는Microsoft인증 70-433최신 실제시험문제의 모든 시험문제를 커버하고 있어 덤프에 있는 내용만 공부하시면 아무런 걱정없이 시험에 도전할수 있습니다.
아무런 노력을 하지 않고 승진이나 연봉인상을 꿈꾸고 있는 분이라면 이 글을 검색해낼수 없었을것입니다. 승진이나 연봉인상을 꿈꾸면 승진과 연봉인상을 시켜주는 회사에 능력을 과시해야 합니다. IT인증시험은 국제적으로 승인해주는 자격증을 취득하는 시험입니다. ITExamDump의Microsoft인증 70-433덤프의 도움으로 Microsoft인증 70-433시험을 패스하여 자격증을 취득하면 승진이나 연봉인상의 꿈이 이루어집니다. 결코 꿈은 이루어질것입니다.
ITExamDump에서 Microsoft인증 70-433덤프를 구입하시면 퍼펙트한 구매후 서비스를 제공해드립니다. Microsoft인증 70-433덤프가 업데이트되면 업데이트된 최신버전을 무료로 서비스로 드립니다. 시험에서 불합격성적표를 받으시면 덤프구매시 지불한 덤프비용은 환불해드립니다.
Microsoft인증사에서 주췌하는 70-433시험은 IT업계에 종사하는 분이시라면 모두 패스하여 자격증을 취득하고 싶으리라 믿습니다. ITExamDump에서는 여러분이 IT인증자격증을 편하게 취득할수 있게 도와드리는 IT자격증시험대비시험자료를 제공해드리는 전문 사이트입니다. ITExamDump덤프로 자격증취득의 꿈을 이루세요.
시험 번호/코드: 70-433
시험 이름: Microsoft (TS: Microsoft SQL Server 2008, Database Development)
인재가 넘치는 IT업계에서 자기의 자리를 지켜나가려면 학력보다 능력이 더욱 중요합니다.고객님의 능력을 증명해주는 수단은 국제적으로 승인받은 IT인증자격증이 아니겠습니까? Microsoft인증 70-433시험이 어렵다고 하여 두려워 하지 마세요. IT자격증을 취득하려는 분들의 곁에는ITExamDump가 있습니다. ITExamDump의Microsoft인증 70-433시험준비를 하시고 시험패스하여 자격증을 취득하세요. 국제승인 자격증이라 고객님의 경쟁율을 업그레이드 시켜드립니다.
70-433 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-433.html
NO.1 You have a single CLR assembly in your database. The assembly only references blessed
assemblies from the Microsoft .NET Framework and does not access external resources.
You need to deploy this assembly by using the minimum required permissions. You must ensure that your
database remains as secure as possible.
Which options should you set?
A. PERMISSION_SET = SAFE
TRUSTWORTHY ON
B. PERMISSION_SET = SAFE
TRUSTWORTHY OFF
C. PERMISSION_SET = UNSAFE
TRUSTWORTHY ON
D. PERMISSION_SET = EXTERNAL_ACCESS
TRUSTWORTHY OFF
Answer: B
Microsoft인증 70-433 70-433최신덤프 70-433최신덤프
NO.2 You have a table named Customer.
You need to ensure that customer data in the table meets the following requirements:
credit limit must be zero unless customer identification has been verified.
credit limit must be less than 10,000.
Which constraint should you use?
A. CHECK (CreditLimt BETWEEN 1 AND 10000)
B. CHECK (Verified = 1 AND CreditLimt BETWEEN 1 AND 10000)
C. CHECK ((CreditLimt = 0 AND Verified = 0) OR (CreditLimt BETWEEN 1 AND 10000 AND Verified = 1))
D. CHECK ((CreditLimt = 0 AND Verified = 0) AND (CreditLimt BETWEEN 1 AND 10000 AND Verified =
1))
Answer: C
Microsoft 70-433 pdf 70-433자격증 70-433덤프
NO.3 Click the Exhibit button.
You are developing a database using Microsoft SQL Server 2008. The database contains the tables
shown in the exhibit.
You are required to prevent parts from being deleted if they belong to a kit. If a part belongs to a kit, the
delete should not occur and the IsDeleted column for the row should be changed to 'True'. Parts can be
deleted if they do not belong to a kit.
You have the following Transact-SQL statement to be used in a trigger:
UPDATE p
SET IsDeleted = 1
FROM KitPart kp
JOIN deleted d ON kp.PartID = d.PartID
JOIN Part p ON kp.PartID = p.PartID;
DELETE FROM p
FROM Part p
JOIN deleted d ON p.PartID = d.PartID
LEFT OUTER JOIN KitPart kp ON p.PartID = kp.PartID
WHERE kp.KitID IS NULL;
You need to implement the Transact-SQL statement in a trigger. Which trigger syntax should you use?
A. CREATE TRIGGER tr_Part_d ON Part
AFTER DELETE AS
BEGIN
END
B. CREATE TRIGGER tr_Part_d ON Part
INSTEAD OF DELETE AS
BEGIN
END
C. CREATE TRIGGER tr_KitPart_d ON KitPart
AFTER DELETE AS
BEGIN
END
D. CREATE TRIGGER tr_KitPart_d ON KitPart
INSTEAD OF DELETE AS
BEGIN
END
Answer: B
Microsoft자격증 70-433 70-433최신덤프 70-433 70-433자격증
NO.4 You are creating a new table in a database. Your business requires you to store data in the table for
only seven days.
You need to implement a partitioned table to meet this business requirement.
Which tasks should you complete?
A. Create the partition function
Create the partition scheme
Create the table
B. Create the partition function
Create the table
Create a filtered index
C. Add a secondary file to the primary filegroups
Create the table
Create the distributed partitioned view
D. Create the partition function
Create the partition scheme
Create the distributed partitioned view
Answer: A
Microsoft 70-433 70-433자격증
NO.5 You need to identify, within a given clause, if the month of February will contain 29 days for a specified
year.
Which object should you use?
A. DML trigger
B. Stored procedure
C. Table-valued function
D. Scalar-valued function
Answer: D
Microsoft 70-433최신덤프 70-433시험문제 70-433
NO.6 You are creating a function that references a table.
You need to prevent the table from being dropped.
Which option should you use when you create the function?
A. WITH ENCRYPTION
B. WITH EXECUTE AS
C. WITH SCHEMABINDING
D. WITH RETURNS NULL ON NULL INPUT
Answer: C
Microsoft 70-433 70-433 70-433 pdf
NO.7 You have multiple tables that represent properties of the same kind of entities. The property values
are comprised of text, geometry, varchar(max), and user-defined types specified as 'bit NOT NULL' data
types.
You plan to consolidate the data from multiple tables into a single table. The table will use semi-structured
storage by taking advantage of the SPARSE option.
You are tasked to identify the data types that are compatible with the SPARSE option.
Which data type is compatible with the SPARSE option?
A. text
B. geometry
C. varchar(max)
D. A user-defined type defined as 'bit NOT NULL'
Answer: C
Microsoft dumps 70-433 70-433자료 70-433
NO.8 You have a SQL Server database. The database contains two schemas named Marketing and Sales.
The Marketing schema is owned by a user named MarketingManager. The Sales schema is owned by a
user named SalesManager.
A user named John must be able to access the Sales.Orders table by using a stored procedure named
Marketing.GetSalesSummary. John is not granted a SELECT permission on the Sales.Orders table. A
user named SalesUser does have SELECT permission on the Sales.Orders table. You need to implement
appropriate permissions for John and the stored procedure Marketing.GetSalesSummary.
What should you do?
A. Marketing.GetSalesSummary should be created by using the EXECUTE AS 'SalesUser' clause.
John should be granted EXECUTE permission on Marketing.GetSalesSummary.
B. Marketing.GetSalesSummary should be created by using the EXECUTE AS OWNER clause.
John should be granted EXECUTE WITH GRANT OPTION on Marketing.GetSalesSummary.
C. Marketing.GetSalesSummary should be created by using the EXECUTE AS CALLER clause.
John should be granted IMPERSONATE permission for the user named SalesUser.
D. Marketing.GetSalesSummary should be created without an EXECUTE AS clause.
John should be granted SELECT permission on the Sales.Orders table.
Answer: A
Microsoft최신덤프 70-433 70-433시험문제
NO.9 You have a third-party application that inserts data directly into a table.
You add two new columns to the table. These columns cannot accept NULL values and cannot use
default constraints.
You need to ensure that the new columns do not break the third-party application.
What should you do?
A. Create a DDL trigger.
B. Create a stored procedure.
C. Create an AFTER INSERT trigger.
D. Create an INSTEAD OF INSERT trigger.
Answer: D
Microsoft덤프 70-433자격증 70-433 70-433
NO.10 You have a user named John. He has SELECT access to the Sales schema. You need to eliminate
John's SELECT access rights from the Sales.SalesOrder table without affecting his other permissions.
Which Transact-SQL statement should you use?
A. DROP USER John;
B. DENY SELECT ON Sales.SalesOrder TO John;
C. GRANT DELETE ON Sales.SalesOrder TO John;
D. REVOKE SELECT ON Sales.SalesOrder FROM John;
Answer: B
Microsoft기출문제 70-433자격증 70-433 dumps 70-433시험문제 70-433덤프 70-433
NO.11 You plan to add a new column named SmallKey to the Sales.Product table that will be used in a
unique constraint. You are required to ensure that the following information is applied when adding the
new column:
'a1' and 'A1' are treated as different values
'a' and 'A' sort before 'b' and 'B' in an ORDER BY clause
You need to select the collation that meets the requirements for the new column. Which collation should
you select?
A. Latin1_General_BIN
B. SQL_Latin1_General_CP1_CI_AI
C. SQL_Latin1_General_CP1_CI_AS
D. SQL_Latin1_General_CP1_CS_AS
Answer: D
Microsoft 70-433덤프 70-433기출문제 70-433덤프
NO.12 You have a computed column that is implemented with a user-defined function. The user-defined
function returns a formatted account number. The column must be indexed to provide adequate search
performance.
You plan to create an index on the computed column. You need to identify the valid combination of
ObjectPropertyEX values for the user-defined function.
Which combination should you use?
A. IsDeterministic = True
IsSystemVerified = True
UserDataAccess = False
SystemDataAccess = False
B. IsDeterministic = True
IsSystemVerified = True
IsPrecise = True
IsTableFunction = True
C. IsDeterministic = False
IsSystemVerified = True
UserDataAccess = False
SystemDataAccess = False
D. IsDeterministic = False
IsSystemVerified = True
IsPrecise = True
SystemDataAccess = False
Answer: A
Microsoft자료 70-433 70-433 70-433덤프 70-433 70-433
NO.13 You are responsible for a SQL Server database. You require the tables to be added or altered only on
the first day of the month. You need to ensure that if the tables are attempted to be modified or created on
any other day, an error is received and the attempt is not successful.
Which Transact-SQL statement should you use?
A. CREATE TRIGGER TRG_TABLES_ON_FIRST
ON DATABASE FOR CREATE_TABLE
AS
IF DATEPART(day,getdate())>1
BEGIN
RAISERROR ('Must wait til next month.', 16, 1)
END
B. CREATE TRIGGER TRG_TABLES_ON_FIRST
ON DATABASE FOR CREATE_TABLE,ALTER_TABLE
AS
IF DATEPART(day,getdate())>1
BEGIN
RAISERROR ('Must wait til next month.', 16, 1)
END
C. CREATE TRIGGER TRG_TABLES_ON_FIRST
ON DATABASE FOR CREATE_TABLE,ALTER_TABLE
AS
IF DATEPART(day,getdate())>1
BEGIN
ROLLBACK
RAISERROR ('Must wait til next month.', 16, 1)
END
D. CREATE TRIGGER TRG_TABLES_ON_FIRST
ON ALL SERVER FOR ALTER_DATABASE
AS
IF DATEPART(day,getdate())>1
BEGIN
ROLLBACK
RAISERROR ('Must wait til next month.', 16, 1)
END
Answer: C
Microsoft인증 70-433기출문제 70-433자격증 70-433
NO.14 You need to create a stored procedure that accepts a table-valued parameter named @Customers.
Which code segment should you use?
A. CREATE PROCEDURE AddCustomers
(@Customers varchar(max))
B. CREATE PROCEDURE AddCustomers
(@Customers Customer READONLY)
C. CREATE PROCEDURE AddCustomers
(@Customers CustomerType OUTPUT)
D. CREATE PROCEDURE ADDCUSTOMERS
(@Customers varchar (max))
AS
EXTERNAL NAME Customer.Add.NewCustomer
Answer: B
Microsoft 70-433 70-433 70-433자격증 70-433덤프
NO.15 You have created an assembly that utilizes unmanaged code to access external resources.
You need to deploy the assembly with the appropriate permissions.
Which permission set should you use?
A. SAFE
B. UNSAFE
C. EXTERNAL_ACCESS
D. Default permission set
Answer: B
Microsoft 70-433 pdf 70-433 pdf 70-433시험문제
NO.16 You have a table named dbo.Customers. The table was created by using the following Transact-SQL
statement:
CREATE TABLE dbo.Customers
(
CustomerID int IDENTITY(1,1) PRIMARY KEY CLUSTERED,
AccountNumber nvarchar(25) NOT NULL,
FirstName nvarchar(50) NOT NULL,
LastName nvarchar(50) NOT NULL,
AddressLine1 nvarchar(255) NOT NULL,
AddressLine2 nvarchar(255) NOT NULL,
City nvarchar(50) NOT NULL,
StateProvince nvarchar(50) NOT NULL,
Country nvarchar(50) NOT NULL,
PostalCode nvarchar(50) NOT NULL,
CreateDate datetime NOT NULL DEFAULT(GETDATE()),
ModifiedDate datetime NOT NULL DEFAULT(GETDATE())
)
You create a stored procedure that includes the AccountNumber, Country, and StateProvince columns
from the dbo.Customers table. The stored procedure accepts a parameter to filter the output on the
AccountNumber column.
You need to optimize the performance of the stored procedure. You must not change the existing
structure of the table.
Which Transact-SQL statement should you use?
A. CREATE STATISTICS ST_Customer_AccountNumber
ON dbo.Customer (AccountNumber)
WITH FULLSCAN;
B. CREATE CLUSTERED INDEX IX_Customer_AccountNumber
ON dbo.Customer (AccountNumber);
C. CREATE NONCLUSTERED INDEX IX_Customer_AccountNumber
ON dbo.Customer (AccountNumber)
WHERE AccountNumber = '';
D. CREATE NONCLUSTERED INDEX IX_Customer_AccountNumber
ON dbo.Customer (AccountNumber)
INCLUDE (Country, StateProvince);
Answer: D
Microsoft인증 70-433 70-433
NO.17 You manage a SQL Server 2008 database that is located at your company's corporate headquarters.
The database contains a table named dbo.Sales. You need to create different views of the dbo.Sales
table that will be used by each region to insert, update, and delete rows. Each regional office must only be
able to insert, update, and delete rows for their respective region.
Which view should you create for Region1?
A. CREATE VIEW dbo.Region1Sales
AS
SELECT SalesID,OrderQty,SalespersonID,RegionID
FROM dbo.Sales
WHERE RegionID = 1;
B. CREATE VIEW dbo.Region1Sales
AS
SELECT SalesID,OrderQty,SalespersonID,RegionID
FROM dbo.Sales
WHERE RegionID = 1
WITH CHECK OPTION;
C. CREATE VIEW dbo.Region1Sales
WITH SCHEMABINDING
AS
SELECT SalesID,OrderQty,SalespersonID,RegionID
FROM dbo.Sales
WHERE RegionID = 1;
D. CREATE VIEW dbo.Region1Sales
WITH VIEW_METADATA
AS
SELECT SalesID,OrderQty,SalespersonID,RegionID
FROM dbo.Sales
WHERE RegionID = 1;
Answer: B
Microsoft 70-433 70-433 70-433 70-433인증
NO.18 You are creating a table that stores the GPS location of customers.
You need to ensure that the table allows you to identify customers within a specified sales boundary and
to calculate the distance between a customer and the nearest store.
Which data type should you use?
A. geometry
B. geography
C. nvarchar(max)
D. varbinary(max) FILESTREAM
Answer: B
Microsoft 70-433 70-433 70-433 70-433 70-433 pdf
NO.19 You need to alter stored procedures to use the WITH RECOMPILE option. Which types of stored
procedures should you alter? (Each correct answer represents a complete solution. Choose two.)
A. Stored procedures implemented from CLR assemblies.
B. Stored procedures that require the FOR REPLICATION option.
C. Stored procedures that require the WITH ENCRYPTION option.
D. Stored procedures that contain queries that use the OPTION (RECOMPILE) hint.
Answer: CD
Microsoft 70-433 70-433 70-433덤프 70-433자격증 70-433
NO.20 Your database contains two tables named Order and OrderDetails that store order information. They
relate to each other using the OrderID column in each table. Your business requires that the
LastModifiedDate column in the Order table must reflect the date and time when a change is made in the
OrderDetails table for the related order.
You need to create a trigger to implement this business requirement.
Which Transact-SQL statement should you use?
A. CREATE TRIGGER [uModDate] ON [OrderDetails]
INSTEAD OF UPDATE FOR REPLICATION
AS
UPDATE [Order]
SET [LastModifiedDate] = GETDATE()
FROM inserted
WHERE inserted.[OrderID] = [Order].[OrderID];
B. CREATE TRIGGER [uModDate] ON [Order]
INSTEAD OF UPDATE NOT FOR REPLICATION
AS
UPDATE [Order]
SET [LastModifiedDate] = GETDATE()
FROM inserted
WHERE inserted.[OrderID] = [Order].[OrderID];
C. CREATE TRIGGER [uModDate] ON [Order]
AFTER UPDATE FOR REPLICATION
AS
UPDATE [Order]
SET [LastModifiedDate] = GETDATE()
FROM inserted
WHERE inserted.[OrderID] = [Order].[OrderID];
D. CREATE TRIGGER [uModDate] ON [OrderDetails]
AFTER UPDATE NOT FOR REPLICATION
AS
UPDATE [Order]
SET [LastModifiedDate] = GETDATE()
FROM inserted
WHERE inserted.[OrderID] = [Order].[OrderID];
Answer: D
Microsoft 70-433 pdf 70-433 70-433최신덤프 70-433
NO.21 You need to ensure that tables are not dropped from your database.
What should you do?
A. Create a DDL trigger that contains COMMIT.
B. Create a DML trigger that contains COMMIT.
C. Create a DDL trigger that contains ROLLBACK.
D. Create a DML trigger that contains ROLLBACK.
Answer: C
Microsoft 70-433 dump 70-433 70-433 70-433
NO.22 You administer a SQL Server 2008 database that contains a table name dbo.Sales, which contains the
following table definition:
CREATE TABLE [dbo].[Sales](
[SalesID] [int] IDENTITY(1,1) NOT NULL PRIMARY KEY CLUSTERED,
[OrderDate] [datetime] NOT NULL,
[CustomerID] [int] NOT NULL,
[SalesPersonID] [int] NULL,
[CommentDate] [date] NULL);
This table contains millions of orders. You run the following query to determine when sales persons
comment in the dbo.Sales table:
SELECT SalesID,CustomerID,SalesPersonID,CommentDate
FROM dbo.Sales
WHERE CommentDate IS NOT NULL
AND SalesPersonID IS NOT NULL;
You discover that this query runs slow. After examining the data, you find only 1% of rows have comment
dates and the SalesPersonID is null on 10% of the rows. You need to create an index to optimize the
query. The index must conserve disk space while optimizing your query.
Which index should you create?
A. CREATE NONCLUSTERED INDEX idx1
ON dbo.Sales (CustomerID)
INCLUDE (CommentDate,SalesPersonID);
B. CREATE NONCLUSTERED INDEX idx1
ON dbo.Sales (SalesPersonID)
INCLUDE (CommentDate,CustomerID);
C. CREATE NONCLUSTERED INDEX idx1
ON dbo.Sales (CustomerID)
INCLUDE(CommentDate)
WHERE SalesPersonID IS NOT NULL;
D. CREATE NONCLUSTERED INDEX idx1
ON dbo.Sales (CommentDate, SalesPersonID)
INCLUDE(CustomerID)
WHERE CommentDate IS NOT NULL;
Answer: D
Microsoft 70-433최신덤프 70-433 70-433
NO.23 You have a SQL Server 2008 database named Contoso with a table named Invoice. The primary key of
the table is InvoiceId, and it is populated by using the identity property. The Invoice table is related to the
InvoiceLineItem table. You remove all constraints from the Invoice table during a data load to increase
load speed. You notice that while the constraints were removed, a row with InvoiceId = 10 was removed
from the database. You need to re-insert the row into the Invoice table with the same InvoiceId value.
Which Transact-SQL statement should you use?
A. INSERT INTO Invoice (InvoiceId, ...
VALUES (10, ...
B. SET IDENTITY_INSERT Invoice ON;
INSERT INTO Invoice (InvoiceId, ...
VALUES (10, ...
SET IDENTITY_INSERT Invoice OFF;
C. ALTER TABLE Invoice;
ALTER COLUMN InvoiceId int;
INSERT INTO Invoice (InvoiceId, ...
VALUES (10, ...
D. ALTER DATABASE Contoso SET SINGLE_USER;
INSERT INTO Invoice (InvoiceId, ...
VALUES (10, ...
ALTER DATABASE Contoso SET MULTI_USER;
Answer: B
Microsoft자료 70-433기출문제 70-433덤프 70-433 70-433자료 70-433기출문제
NO.24 Your database is 5GB and contains a table named SalesHistory. Sales information is frequently
inserted and updated.
You discover that excessive page splitting is occurring.
You need to reduce the occurrence of page splitting in the SalesHistory table.
Which code segment should you use?.
A. ALTER DATABASE Sales
MODIFY FILE
(NAME = Salesdat3,
SIZE = 10GB);
B. ALTER INDEX ALL ON Sales.SalesHistory
REBUILD WITH (FILLFACTOR = 60);
C. EXEC sys.sp_configure 'fill factor (%)', '60';
D. UPDATE STATISTICS Sales.SalesHistory(Products)
WITH FULLSCAN, NORECOMPUTE;
Answer: B
Microsoft 70-433 70-433 70-433자격증 70-433
NO.25 You are developing a new database. The database contains two tables named SalesOrderDetail and
Product.
You need to ensure that all products referenced in the SalesOrderDetail table have a corresponding
record in the Product table.
Which method should you use?
A. JOIN
B. DDL trigger
C. Foreign key constraint
D. Primary key constraint
Answer: C
Microsoft 70-433 70-433 70-433자격증 70-433
NO.26 You have two partitioned tables named Transaction and TransactionHistory.
You need to archive one of the partitions of the Transaction table to the TransactionHistory table.
Which method should you use?
A. ALTER TABLE ...
SWITCH ...
B. INSERT ... SELECT ...;
TRUNCATE TABLE
C. ALTER PARTITION FUNCTION ...
MERGE ...
D. ALTER PARTITION FUNCTION ...
SPLIT ...
Answer: A
Microsoft 70-433 70-433덤프 70-433 70-433기출문제
NO.27 You currently store date information in two columns. One column contains the date in local time and
one column contains the difference between local time and UTC time. You need to store this data in a
single column.
Which data type should you use?
A. time
B. datetime2
C. datetime2(5)
D. datetimeoffset
Answer: D
Microsoft기출문제 70-433 70-433시험문제 70-433 dump
NO.28 You have a table named AccountsReceivable. The table has no indexes. There are 75,000 rows in the
table. You have a partition function named FG_AccountData. The AccountsReceivable table is defined in
the following Transact-SQL statement:
CREATE TABLE AccountsReceivable (
column_a INT NOT NULL,
column_b VARCHAR(20) NULL)
ON [PRIMARY];
You need to move the AccountsReceivable table from the PRIMARY file group to FG_AccountData.
Which Transact-SQL statement should you use?
A. CREATE CLUSTERED INDEX idx_AccountsReceivable
ON AccountsReceivable(column_a)
ON [FG_AccountData];
B. CREATE NONCLUSTERED INDEX idx_AccountsReceivable
ON AccountsReceivable(column_a)
ON [FG_AccountData];
C. CREATE CLUSTERED INDEX idx_AccountsReceivable
ON AccountsReceivable(column_a)
ON FG_AccountData(column_a);
D. CREATE NONCLUSTERED INDEX idx_AccountsReceivable
ON AccountsReceivable(column_a)
ON FG_AccountData(column_a);
Answer: C
Microsoft인증 70-433 70-433덤프 70-433자료
NO.29 You have tables named Products and OrderDetails. The Products table has a foreign key relationship
with the OrderDetails table on the ProductID column. You have the following Transact-SQL batch:
BEGIN TRY
BEGIN TRANSACTION
DELETE FROM Products WHERE ProductID = 5;
BEGIN TRANSACTION
INSERT INTO OrderDetails
( OrderID, ProductID, Quantity )
VALUES
( 1234, 5, 12 );
COMMIT TRANSACTION
COMMIT TRANSACTION
END TRY
BEGIN CATCH
ROLLBACK TRANSACTION
PRINT ERROR_MESSAGE();
END CATCH
You need to analyze the result of executing this batch. What should be the expected outcome?
A. 1. The product will be deleted from the Products table.
2. The order details will be inserted into the OrderDetails table.
B. 1. The product will be deleted from the Products table.
2. The order details will not be inserted into the OrderDetails table.
C. 1. The product will not be deleted from the Products table.
2. The order details will be inserted into the OrderDetails table.
D. 1. The product will not be deleted from the Products table.
2. The order details will not be inserted into the OrderDetails table.
Answer: D
Microsoft자격증 70-433덤프 70-433
NO.30 You need to create a column that allows you to create a unique constraint.
Which two column definitions should you choose? (Each correct answer presents a complete solution.
Choose two.)
A. nvarchar(100) NULL
B. nvarchar(max) NOT NULL
C. nvarchar(100) NOT NULL
D. nvarchar(100) SPARSE NULL
Answer: AC
Microsoft자료 70-433 dump 70-433최신덤프
ITExamDump에서는 전문Microsoft 70-433인증시험을 겨냥한 덤프 즉 문제와 답을 제공합니다.여러분이 처음Microsoft 70-433인증시험준비라면 아주 좋은 덤프입니다. ITExamDump에서 제공되는 덤프는 모두 실제시험과 아주 유사한 덤프들입니다.Microsoft 70-433인증시험패스는 보장합니다. 만약 떨어지셨다면 우리는 덤프비용전액을 환불해드립니다.
댓글 없음:
댓글 쓰기