ITExamDump의 HP인증 HP0-Y18덤프를 구매하시면 1년동안 무료 업데이트서비스버전을 받을수 있습니다. 시험문제가 변경되면 업데이트 하도록 최선을 다하기에ITExamDump의 HP인증 HP0-Y18덤프의 유효기간을 연장시켜드리는 셈입니다.퍼펙트한 구매후는 서비스는ITExamDump의 HP인증 HP0-Y18덤프를 구매하시면 받을수 있습니다.
만약 여러분은HP HP0-Y18인증시험취득으로 이 치열한 IT업계경쟁 속에서 자기만의 자리를 잡고, 스펙을 쌓고, 전문적인 지식을 높이고 싶으십니까? 하지만HP HP0-Y18패스는 쉬운 일은 아닙니다.HP HP0-Y18패스는 여러분이 IT업계에 한발작 더 가까워졌다는 뜻이죠. 하지만 이렇게 중요한 시험이라고 많은 시간과 정력을 낭비할필요는 없습니다. ITExamDump의 완벽한 자료만으로도 가능합니다. ITExamDump의 덤프들은 모두 전문적으로 IT관련인증시험에 대하여 연구하여 만들어진것이기 때문입니다.
IT인증시험은 국제적으로 인정받는 자격증을 취득하는 과정이라 난이도가 아주 높습니다. HP인증 HP0-Y18시험은 IT인증자격증을 취득하는 시험과목입니다.어떻게 하면 난이도가 높아 도전할 자신이 없는 자격증을 한방에 취득할수 있을가요? 그 답은ITExamDump에서 찾을볼수 있습니다. ITExamDump에서는 모든 IT인증시험에 대비한 고품질 시험공부가이드를 제공해드립니다. ITExamDump에서 연구제작한 HP인증 HP0-Y18덤프로HP인증 HP0-Y18시험을 준비해보세요. 시험패스가 한결 편해집니다.
ITExamDump는 아주 믿을만하고 서비스 또한 만족스러운 사이트입니다. 만약 시험실패 시 우리는 100% 덤프비용 전액환불 해드립니다.그리고 시험을 패스하여도 우리는 일 년 동안 무료업뎃을 제공합니다.
ITExamDump는 IT인증시험 자격증 공부자료를 제공해드리는 전문적인 사이트입니다. ITExamDump제품은 100%통과율을 자랑하고 있습니다. HP인증 HP0-Y18시험이 어려워 자격증 취득을 망설이는 분들이 많습니다. ITExamDump가 있으면 이런 걱정은 하지 않으셔도 됩니다. ITExamDump의HP인증 HP0-Y18덤프로 시험을 한방에 통과하여 승진이나 연봉인상에 도움되는 자격증을 취득합시다.
시험 번호/코드: HP0-Y18
시험 이름: HP (ProCurve Secure Mobility Solutions)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 104 문항
업데이트: 2014-01-05
ITExamDump에서 제공하는 제품들은 품질이 아주 좋으며 또 업뎃속도도 아주 빠릅니다 만약 우리가제공하는HP HP0-Y18인증시험관련 덤프를 구매하신다면HP HP0-Y18시험은 손쉽게 성공적으로 패스하실 수 있습니다.
우리 ITExamDump에서는 최고이자 최신의HP 인증HP0-Y18덤프자료를 제공 함으로 여러분을 도와HP 인증HP0-Y18인증자격증을 쉽게 취득할 수 있게 해드립니다.만약 아직도HP 인증HP0-Y18시험패스를 위하여 고군분투하고 있다면 바로 우리 ITExamDump를 선택함으로 여러분의 고민을 날려버릴수 있습니다.
HP0-Y18 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y18.html
NO.1 What purpose does the second software image on the ProCurve AP 420 serve?
A. It allows you to choose two different images to load onto the AP.
B. It allows you to keep the last software image that was loaded onto the AP.
C. It provides a failsafe image in the event the primary image becomes corrupted.
D. It provides an alternate software version in the event the primary does not support your configuration.
Answer: C
HP HP0-Y18 HP0-Y18 HP0-Y18
NO.2 Your company wants to use the 2. 4GHz frequency on both of your ProCurve AP 530 radios.What
must you do so that both radios can use this frequency?
A. Set both radios to either 802. 11g or 802. 11b.
B. Set both radios to either 802. 11g or 802. 11b, and install an external antenna for radio 2.
C. Install an 802. 11b/g card on radio 2, and set both radios to either 802. 11g or 802. 11b.
D. Set one radio to 802. 11g and one radio to 802. 11b, install an external antenna for radio 1, and
configure radio 1 to use an external antenna.
Answer: B 18. Which ProCurve AP 530 feature is most beneficial for a small to medium business that has
strong security needs?
A. It monitors for excessive probes to detect possible intrusion attempts.
B. Its internal RADIUS server provides standalone support for 802. 1X authentication.
C. Unlike the ProCurve AP 420, it can operate all 16 of its wireless LANs in closed system.
D. It supports 802. 11a, and hackers generally do not check for networks on this frequency.
Answer: B
HP dump HP0-Y18 dumps HP0-Y18 dumps
19. A network administrator accesses the Marketing WLAN, which is assigned to VLAN 32 on the
ProCurve AP 530.When the AP 530 submits the administrator's login credentials to the RADIUS server,
the RADIUS server returns a dynamic VLAN assignment of 10 to the AP 530.The AP 530 is using the
default settings for dynamic and static VLAN support. In which VLAN does the AP 530 place the network
administrator's traffic?
A. 32, because dynamic VLANs are disabled by default
B. the default management VLAN, because there is a VLAN conflict
C. 10, because dynamic VLAN assignments override static VLAN assignments
D. 32, because static VLAN assignments override dynamic VLAN assignments
Answer: C
HP HP0-Y18 HP0-Y18
20. You are configuring a WLAN on the ProCurve AP 420.When students, faculty members, and
administrators associate to the WLAN, you want them to receive the dynamic VLAN assignment for their
particular group.However, when staff members associate to the WLAN you want their traffic to be placed
in the VLAN that is assigned to the WLAN. How do you configure the AP 420 to support these VLAN
assignments?
A. You select the Dynamic VLAN option for the WLAN.Static VLANs are supported by default.
B. You select both the Static and Dynamic VLAN options.These global options apply to the entire AP 420.
C. You select the Enable VLAN option for the WLAN.This option enables support for both static and
dynamic VLANs on this WLAN only.
D. You select the Dynamic VLAN option, which enables both static and dynamic VLANs.This global
option applies to the entire AP 420.
Answer: D
HP pdf HP0-Y18 dump HP0-Y18시험문제 HP0-Y18최신덤프 HP0-Y18자격증
NO.3 How many configuration files can be stored on the ProCurve AP 420?
A. 2: the startup-config and the factory default config
B. 3: the startup-config, the factory default config, and one custom config
C. 3: the factory default config, the startup-config, and the backup startup-config
D. 4: the factory default config, the startup-config, the backup startup-config, and one custom config
Answer: A
HP HP0-Y18 HP0-Y18시험문제 HP0-Y18
NO.4 Your company has a branch office down the street from your main office.You want to connect the
networks between the two offices, and physical cabling is not an option.Which wireless devices should
you select for this environment?
A. two ProCurve AP 420s
B. two ProCurve AP 530s
C. two RP 230s and a Wireless Edge Services xl Module
D. two RP 220s with Yagi antennas and a Wireless Edge Services zl Module
Answer: B
HP HP0-Y18 HP0-Y18 HP0-Y18
NO.5 Wireless networks present certain challenges.Which wireless network challenge does ProCurve
Mobility Infrastructure Solutions help you address?
A. Users are less productive when using a wireless connection.
B. 802. 11 standards do not provide any guidelines for Layer 2 roaming.
C. 802. 11 standards do not provide any encryption, so you must create VPN tunnels to each end station.
D. Multiple users connect to the network through the same AP, but access must be authorized for each
user.
Answer: D
HP HP0-Y18 HP0-Y18자격증
NO.6 What is the default management username and password on the ProCurve AP 530?
A. The username is admin, and the password is admin.
B. The username is admin, and the password is procurve.
C. The username is manager, and the password is procurve.
D. The username is admin, and there is no default password.
Answer: A
HP덤프 HP0-Y18 HP0-Y18 HP0-Y18자격증
NO.7 You are configuring a ProCurve AP 530.You configure two WLANs.What is one reason to enable the
first WLAN only on radio 1 and the second WLAN only on radio 2?
A. to overcome environmental obstacles
B. to double the capacity of each WLAN by using two radios
C. to separate different types of wireless traffic into different collision domains
D. to allow users to choose their radio but still connect to the same Basic Service Set (BSS)
Answer: C
HP HP0-Y18자료 HP0-Y18 HP0-Y18 pdf HP0-Y18인증
NO.8 Which security option was part of the original 802. 11 standard?
A. 802. 1X
B. Shared-key WEP
C. Dynamic Wired Equivalent Privacy (WEP)
D. Wi-Fi Protected Access with preshared keys (WPA-PSK)
Answer: B
HP HP0-Y18 HP0-Y18 HP0-Y18 HP0-Y18 dump
NO.9 What does the slot time determine?
A. the number of seconds the AP waits between sending beacons
B. the length of time the station waits between detecting a transmission and sending a frame
C. the beginning of the 802. 11 frame, which enables the AP and the station to synchronize their
transmissions
D. how long the station can "sleep" before it must become active and check the AP to see if there are any
transmissions waiting for it
Answer: B
HP자격증 HP0-Y18자격증 HP0-Y18 dump HP0-Y18
NO.10 What does Spanning Tree Protocol (STP) on the ProCurve AP 530 prevent?
A. loops over connections to stations in the wireless network
B. loops over the APs Ethernet and wireless bridge connections
C. loops over connections between stations in the wireless and the wired network
D. loops over connections between only wireless stations associated with multiple APs
Answer: B
HP HP0-Y18 HP0-Y18
NO.11 Which Quality of Service (QoS) mechanism do both the ProCurve AP 420 and the ProCurve AP 530
support?
A. Wi-Fi Multimedia (WMM)
B. SpectraLink Voice Priority (SVP)
C. Differentiated Services (DiffServ)
D. Wi-Fi Multimedia Extensions (WME)
Answer: B
HP자료 HP0-Y18 HP0-Y18 HP0-Y18자료
NO.12 When can a station no longer communicate with an AP?
A. when the received signal falls below 0 dBm
B. when the received signal falls below the background noise
C. when the received signal falls below the station's receiver sensitivity
D. when the received signal falls below the fade margin for the wireless cell
Answer: C
HP HP0-Y18 HP0-Y18인증
NO.13 You want ProCurve Radio Port (RP) 1's radio to function as a neighbor for RP 2's radio.RP 1 will
monitor RP 2 and take action if RP 2 becomes unavailable.You configure RP 1's radio to take which
action if RP 2 becomes unavailable? (Select two. )
A. Open its data rates.
B. Change the radio's channel.
C. Increase the radio's transmit power.
D. Order stations associated with RP 2 to roam.
E. Change the radio mode from 802. 11a to 802. 11b/g.
Answer: AC
HP인증 HP0-Y18 HP0-Y18최신덤프 HP0-Y18기출문제
NO.14 What is a function of ProCurve Identity Driven Manager (IDM)?
A. It identifies which wireless users must associate to the wireless network.
B. It enables you to load different configuration files onto your ProCurve Mobility Infrastructure devices.
C. It guides you in creating policies that can be applied, through RADIUS, to either wired or wireless
users.
D. It adds special features to ProCurve Manager (PCM) for configuring radio and wireless security
settings.
Answer: C
HP인증 HP0-Y18 HP0-Y18시험문제
NO.15 The ProCurve Mobility Manager (PMM) site-planning tool provides an Auto Placement tool.What does
this tool take into account as it places devices on the floor plan?
A. the existing RF interference
B. the obstacles that you have defined
C. other devices already placed on the floor plan
D. the floor plan dimensions and desired capacity
Answer: D
HP HP0-Y18 dump HP0-Y18최신덤프
NO.16 The ProCurve AP 420 radio has one Basic Service Set Identifier (BSSID), and each of the two AP 530
radios has 16 BSSIDs.What is the implication of this difference?
A. The AP 420 can advertise only 1 WLAN, but the AP 530 can advertise 16.
B. The AP 420 can support only 1 WLAN, but the AP 530 can support 32.
C. The AP 420 can support only 1 WLAN, but the AP 530 can support 16.
D. The AP 420 can advertise only 1 WLAN, but the AP 530 can advertise 32.
Answer: A
HP HP0-Y18자격증 HP0-Y18 HP0-Y18 HP0-Y18덤프 HP0-Y18최신덤프
NO.17 You need to provide a wireless network for a small area that will require two access points.For this
wireless network, you want to support both 802. 11b/g and 802. 11a radios throughout the entire
coverage area.What would you choose?
A. two ProCurve AP 420s
B. two ProCurve AP 530s
C. ProCurve Wireless LAN System with two Radio Port (RP) 210s
D. ProCurve Wireless LAN System with one RP 230 and one RP 210
Answer: B
HP HP0-Y18 HP0-Y18 HP0-Y18기출문제
ITexamdump의 000-820덤프의 VCE테스트프로그램과 74-325덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-482시험에 대비한 고품질 덤프와 HP2-E56시험 최신버전덤프를 제공해드립니다. 최고품질 LOT-404시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기