ITExamDump 는 여러분의 it전문가 꿈을 이루어드리는 사이트 입다. ITExamDump는 여러분이 우리 자료로 관심 가는 인중시험에 응시하여 안전하게 자격증을 취득할 수 있도록 도와드립니다. 아직도HP HP0-J66인증시험으로 고민하시고 계십니까?HP HP0-J66인증시험가이드를 사용하실 생각은 없나요? ITExamDump는 여러분에 편리를 드릴 수 잇습니다. ITExamDump의 자료는 시험대비최고의 덤프로 시험패스는 문제없습니다. ITExamDump의 각종인증시험자료는 모두기출문제와 같은 것으로 덤프보고 시험패스는 문제없습니다. ITExamDump의 퍼펙트한 덤프인 M crosoftHP0-J66인증시험자료의 문제와 답만 열심히 공부하면 여러분은 완전 안전히HP HP0-J66인증자격증을 취득하실 수 있습니다.
HP인증 HP0-J66시험은 IT업종종사분들에게 널리 알려진 유명한 자격증을 취득할수 있는 시험과목입니다. HP인증 HP0-J66시험은 영어로 출제되는만큼 시험난이도가 많이 높습니다.하지만 ITExamDump의HP인증 HP0-J66덤프만 있다면 아무리 어려운 시험도 쉬워집니다. 오르지 못할 산도 정복할수 있는게ITExamDump제품의 우점입니다. ITExamDump의HP인증 HP0-J66덤프로 시험을 패스하여 자격증을 취득하면 정상에 오를수 있습니다.
목표를 이루는 방법은 여러가지가 있는데 어느 방법을 선택하면 가장 빨리 목표를 이룰수 있을가요? HP인증 HP0-J66시험을 패스하는 길에는ITExamDump의HP인증 HP0-J66덤프를 공부하는 것이 가장 좋은 방법이라는것을 굳게 약속드립니다. ITExamDump의HP인증 HP0-J66덤프는 시험문제에 초점을 두어 제작된 공부자료이기에HP인증 HP0-J66패스를 가장 빠른 시일내에 한방에 할수 있도록 도와드립니다.
HP인증HP0-J66시험을 패스하여 자격증을 취득한다면 여러분의 미래에 많은 도움이 될 것입니다.HP인증HP0-J66시험자격증은 it업계에서도 아주 인지도가 높고 또한 알아주는 시험이며 자격증 하나로도 취직은 문제없다고 볼만큼 가치가 있는 자격증이죠.HP인증HP0-J66시험은 여러분이 it지식테스트시험입니다.
ITExamDump 안에는 아주 거대한IT업계엘리트들로 이루어진 그룹이 있습니다. 그들은 모두 관련업계예서 권위가 있는 전문가들이고 자기만의 지식과 지금까지의 경험으로 최고의 IT인증관련자료를 만들어냅니다. ITExamDump의 문제와 답은 정확도가 아주 높으며 한번에 패스할수 있는 100%로의 보장도를 자랑하며 그리고 또 일년무료 업데이트를 제공합니다.
시험 번호/코드: HP0-J66
시험 이름: HP (HP Storage Migration)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 75 문항
업데이트: 2014-01-16
HP0-J66 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-J66.html
NO.1 Your customer has an existing HP StoreServ 7400 with four controllers. The array has only SSD
drives installed. What should you consider when sizing a solution which includes Adaptive
Optimization?
A. Ensure that 3% of the capacity and 30% of the performance can be delivered by the SAS disks.
B. Include SAS 10/15K disks in the configuration.
C. Add SSDs or nearline disks to a single node pair.
D. Size the nearline tier for 30% of the performance requirement.
Answer: B
HP기출문제 HP0-J66 HP0-J66
Explanation:
Note:
*SAS stands for Serial Attached SCSI. Basically, a SAS drive utilizes the same form factor as a
SATA drive but has several high performance advantages. First of all, there's the platter speed.
While typical SATA drives operate at 7200RPM, a SAS drive operates at 10K or 15K. Although the
platter speed is double that of SATA, the MTBF (Mean Time Before Failure) remains at the
industry standard of 1.2 million hours.
*Make sure to define tier 0 to be on a higher performance level than tier 1, which in turn should be
higher performance than tier 2. For example, you may choose RAID 1 with SSDs for tier 0, RAID 5
with FC drives for tier 1 and RAID 6 with NL or SATA drives for tier 2.
*Best practices encourage you to begin your Adaptive Optimization configurations with your
application CPG starting with tier 1. For example, tier 1 could be CPG using your FC or SAS physical
disks. This allows you to add both higher and lower tier capabilities at a later date. If you don't have
higher or lower tier, you can add either or both at a later date by using a new CPG, such as tier 0
using SSDs or tier 2 using NL. Or, you could have CPG tiers with RAID 1 or RAID 5 and RAID 6. The
main point is that you should begin with middle CPG tier 1 when configuring Adaptive Optimization
with your application.
* Example: HP 3PAR Adaptive Optimization moved ~33 percent of the IOPS workload to the SSD
drives even though that involved moving only 1 percent of the space. Performance improved in two
ways: the 33 percent of the IOPS that were serviced by SSD drives got very good latencies (~2 ms),
and the latencies for the NL drives also improved (from ~40 ms to ~15 ms). Moreover, the
investment in the 16 SSD drives permitted them to add even more NL drives in the future, because
the SSD drives have both space and performance headroom remaining.
Reference;Adaptive Optimization for HP 3PAR StoreServ Storage
NO.2 A customer is planning to migrate their master database to a remote location. Their network
uses GbE for FCIP tunneling. Which Fibre Channel switch port interface must they use?
A. EX_Port
B. E_Port
C. VEX_Port
D. VE_Port
Answer: D
HP HP0-J66인증 HP0-J66 HP0-J66시험문제
Explanation:
*VE_Port-Virtual E_Port used with a GbE port for FCIP tunneling
*You can configure a Fibre Channel port as an F_Port, FL_Port, E_Port, or EX_Port (Fibre Channel
routing),and configure a GbE port as a VE_Port (FCIP) or VEX_Port (FCIP with Fibre Channel routing).
NO.3 A customer needs to migrate data to a new database environment. They need to make a
physical copy of their data that can be presented to the new environment with the highest level of
availability. Which form of replication should the customer use?
A. backups to disk
B. snapshots
C. clones
D. asynchronous replication
Answer: C
HP인증 HP0-J66 HP0-J66시험문제 HP0-J66
Explanation:
Incorrect: Not B:A storage snapshot is a set of reference markers, or pointers, to data stored on a
disk drive, on a tape, or in a storage area network (SAN). A snapshot is something like a detailed
table of contents, but it is treated by the computer as a complete data backup. Snapshots
streamline access to stored data and can speed up the process of data recovery. There are two main
types of storage snapshot, called the copy-on-write (or low-capacity) snapshot and the split-mirror
snapshot. Utilities are available that can automatically generate either type.
9. A customer needs to replicate data from a remote location to an HP StoreOnce B6200 Backup.
A. The HP D2D sizing tool should be usedto size link speed and understand concurrency restraints.
B. Concurrency control should be used if the replication isnot run at the same times as backups and
housekeeping jobs.
C. Separate replication jobs should be created for each datatype.
D. Backups and housekeeping jobs should berun in thereplication window.
Answer: A
HP HP0-J66자격증 HP0-J66 HP0-J66
Explanation:
The replication best practices that apply to HP StoreOnce D2D Backup Systems are
equally as valid for the HP B6200 StoreOnce Backup System.
Best practices include:
*Use the Sizing tool to size replication link speed and understand replication concurrency
restraints.
Reference; HP B6200 Backup System, Recommended Configuration Guidelines
10. In which HP rack is the factory Integration of an HP StoreServ 7000 supported?
A. HP 5642 rack
B. HP G3 rack
C. HP 10000 rack
D. HPV142 rack
Answer: C
HP dump HP0-J66덤프 HP0-J66자료
Explanation:
Choose Racking Options The HP 3PAR StoreServ 7000 is compatible with most industry standard
4-post EIA 19 inch racks with square mounting holes, including the HP Intelligent Series Rack and
the HP 10000 G2 Series Rack. The HP 3PAR StoreServ 7000 can be factory configured and shipped in
a rack or shipped without a rack for field integration into an existing rack. The rack used for factory
integration is the HP Intelligent Series Rack.
NO.4 As part of an upgrade of their existing infrastructure, a customer is considering replacing their
Fibre Channel host bus adapters (HBAs) and Ethernet converged network adapters (CNAs).
How can they expect to improve efficiency through this upgrade?
A. 3:1 port consolidation
B. path failover redundancy
C. greater aggregate throughput
D. cable reduction up to 75%
Answer: A
HP HP0-J66기출문제 HP0-J66 HP0-J66자격증 HP0-J66 dump
Explanation:
The HP Dual Port Converged Network Adapters (CNAs) are dual port adapters that provide Ethernet,
iSCSI, and Fibre Channel (FC) connectivity over 10GbE using both Fibre Channel over Ethernet (FCoE)
and Converged Enhanced Ethernet (CEE) standards. By consolidating Ethernet, iSCSI, and Fibre
Channel onto a converged network adapter, HP CNAs reduce the number of separate adapters and
cables required for your datacenter and also reduce operational, power and cooling costs while
preserving existing Ethernet and Fibre Channel infrastructure.
NO.5 A customer is planning to migrate from an HP EVA to an HP 3PAR StoreServ 7000 Storage
System The customer uses disk groups on the EVA for fine-grained database management.
What can the customer use to achieve fine-grained database management on the HP 3PAR
StoreServ 7000?
A. logical volumes
B. common provisioning groups
C. disk groups
D. virtual volumes
Answer: B
HP최신덤프 HP0-J66시험문제 HP0-J66 HP0-J66 dump
Explanation:
Terminology comparison between EVA and HP 3PAR StoreServ EVA P6000:Disk Group HP 3PAR
StoreServ:Common Provisioning Group (CPG)
NO.6 A customer needs to be able to recover their data in the event of a site failure.
They have a strict recovery point objective for their business-critical applications.
Which technique should the customer use?
A. snapshots
B. backups to tape
C. backups to disk
D. remote replication
Answer: D
HP인증 HP0-J66시험문제 HP0-J66 HP0-J66자격증
Explanation:
Need replication to get the data to a backup site.
Note:
*Recovery Point Objective (RPO) refers to the required point-in-time to which a DR solution
canrestore the state of data for a particular service, for example, how much data loss is
acceptablefollowing a disaster. These requirements can range from "close to zero" data loss (for
high-valuefinancial transactions, for example) to some small number of minutes of the most recent
NO.7 A customer with multiple HP 3PAR P10000 Storage Systems needs to move data between the
arrays. They need to ensure that the migration will not disrupt their applications, users, or services.
Which storage method should the customer use to achieve this goal?
A. point-in-time copies
B. backups to disk
C. storage federation
D. deduplication
Answer: C
HP HP0-J66자격증 HP0-J66 HP0-J66자료
Explanation:
Storage federation from HP enables the online non-disruptive movement of storage volumes
between arrays in a metro area. Unlike external storage virtualization appliances that add cost,
complexity and downtime, storage federation from HP creates a persistent pool of capacity using
native communication between system controllers.
NO.8 What are the benefits of migrating to an HP 3PAR StoreServ 7000?
A. Virtualizationof homogenous storage devices
B. increased efficiency through reduced capacity requirements
C. multi-tier storage availability in hyperscale enterprise platform
D. federated non-disruptive data mobility between third-party systems
Answer: D
HP HP0-J66자료 HP0-J66 HP0-J66
Explanation:
HP 3PAR StoreServ 7000 Storageisthe only platform that offers the performance required to double
virtual machine (VM) density on your physical servers-guaranteed.
Store all of your data on a single system that supports advanced features such as storage federation
and automated tiering and enables you to start small and grow without disruption.
ITexamdump의 HP2-N35덤프의 VCE테스트프로그램과 000-277덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP0-J65시험에 대비한 고품질 덤프와 HH0-380시험 최신버전덤프를 제공해드립니다. 최고품질 MSC-431시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기