2013년 10월 9일 수요일

도비 Juniper JN0-643 시험

ITExamDump 에서 제공해드리는 Juniper JN0-643덤프는 아주 우수한 IT인증덤프자료 사이트입니다. IT업계엘리트한 강사들이 퍼펙트한 Juniper JN0-643 덤프문제집을 제작하여 디테일한 시험문제와 답으로 여러분이 아주 간단히Juniper JN0-643시험을 패스할 수 있도록 최선을 다하고 있습니다.

IT인증시험문제는 수시로 변경됩니다. 이 점을 해결하기 위해ITExamDump의Juniper인증 JN0-643덤프도 시험변경에 따라 업데이트하도록 최선을 다하고 있습니다.시험문제 변경에 초점을 맞추어 업데이트를 진행한후 업데이트된Juniper인증 JN0-643덤프를 1년간 무료로 업데이트서비스를 드립니다.

ITExamDump는 우수한 IT인증시험 공부가이드를 제공하는 전문 사이트인데 업계에서 높은 인지도를 가지고 있습니다. ITExamDump에서는 IT인증시험에 대비한 모든 덤프자료를 제공해드립니다. Juniper인증 JN0-643시험을 준비하고 계시는 분들은ITExamDump의Juniper인증 JN0-643덤프로 시험준비를 해보세요. 놀라운 고득점으로 시험패스를 도와드릴것입니다.시험에서 불합격하면 덤프비용 전액환불을 약속드립니다.

시험 번호/코드: JN0-643
시험 이름: Juniper (Enterprise Routing and Switching, Professional (JNCIP-ENT))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 114 문항
업데이트: 2013-10-08

ITExamDump는Juniper JN0-643시험을 패스할 수 있는 아주 좋은 사이트입니다. ITExamDump은 아주 알맞게 최고의Juniper JN0-643시험문제와 답 내용을 만들어 냅니다. 덤프는 기존의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Juniper JN0-643시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.

Juniper인증 JN0-643시험을 패스하여 자격증을 취득하여 승진이나 이직을 꿈구고 있는 분이신가요? 이 글을 읽게 된다면Juniper인증 JN0-643시험패스를 위해 공부자료를 마련하고 싶은 마음이 크다는것을 알고 있어 시장에서 가장 저렴하고 가장 최신버전의 Juniper인증 JN0-643덤프자료를 강추해드립니다. 높은 시험패스율을 자랑하고 있는Juniper인증 JN0-643덤프는 여러분이 승진으로 향해 달리는 길에 날개를 펼쳐드립니다.자격증을 하루 빨리 취득하여 승진꿈을 이루세요.

JN0-643 덤프무료샘플다운로드하기: http://www.itexamdump.com/JN0-643.html

NO.1 Port authentication falls back to Captive Portal. In which two scenarios would the port
authentication move back to 802.1X? (Choose two.)
A. if any MAC RADIUS request packet is received on the interface and if there are no sessions in
authenticated/authenticating state
B. if Captive Portal is deactivated on the interface
C. if the user gets logged out
D. if the EAP packet is received on the interface and if there are no sessions in
authenticated/authenticating state
Answer: B,D

Juniper덤프   JN0-643   JN0-643 pdf   JN0-643최신덤프   JN0-643덤프

NO.2 Click the Exhibit button.
Host 1, Host 2, and Host 3 are connected to Switch A on interface ge-0/0/2. Host 1 and Host 2 have been
authenticated through 802.1X, however Host 3 does not have an 802.1X supplicant.
Referring to the configuration in the exhibit, how can Host 3 be authenticated?
A. secure-authentication option of HTTP or HTTPS must be configured for Captive Portal.
B. MAC RADIUS authentication must be configured for Host 3 instead of Captive Portal.
C. A new authentication-profile must be configured because 802.1X and Captive Portal cannot have the
same authentication-profile.
D. The 802.1X server failback feature must be configured for Host 3 to allow non-802.1X clients to
authenticate.
Answer: B

Juniper   JN0-643자격증   JN0-643 dump   JN0-643자료

NO.3 A user complains about connectivity problems from their IP address (10.1.1.87) to a server
(10.65.1.100).Which Junos command can help verify connectivity in the network? (Choose two.)
A. mroute
B. traceoptions
C. ping
D. clear bgp neighbor
Answer: B,C

Juniper시험문제   JN0-643   JN0-643인증   JN0-643

NO.4 When 802.1X, MAC-RADIUS, and Captive Portal are enabled on an interface, which
authentication sequence occurs?
A. The authentication sequence is based on the order of the configuration.
B. If MAC-RADIUS is rejected, Captive Portal will start. If Captive portal is timed out, 802.1X will start.
C. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is timed out by the RADIUS server,
then Captive Portal will start.
D. If 802.1X times out, then MAC-RADIUS will start. If MAC-RADIUS is rejected by the RADIUS server,
then Captive Portal will start.
Answer: D

Juniper자격증   JN0-643 pdf   JN0-643덤프   JN0-643인증   JN0-643

NO.5 Which two LSA types are only generated by an ABR router? (Choose two.)
A. ASBR summary LSA (Type 4)
B. ASBR LSA (Type 5)
C. Summary LSA (Type 3)
D. Router LSA (Type 1)
Answer: A,C

Juniper dump   JN0-643 dumps   JN0-643최신덤프

NO.6 What is the default LLDP timeout?
A. 60 seconds
B. 90 seconds
C. 120 seconds
D. infinite
Answer: C

Juniper pdf   JN0-643   JN0-643 pdf   JN0-643덤프

NO.7 Click the Exhibit button.
Based on the output shown in the exhibit, why is VSTP not working for VLAN 100?
A. No interfaces are assigned to VLAN 100.
B. Your MSTI is misconfigured.
C. RSTP is configured in addition to VSTP.
D. No native VLAN is configured.
Answer: A

Juniper   JN0-643최신덤프   JN0-643   JN0-643기출문제   JN0-643

NO.8 Click the Exhibit button.
The exhibit shows the output of an OSPF router LSA.
Which interface ID represents the router's loopback address?
A. ID 10.1.1.0
B. ID 10.0.3.4
C. ID 10.0.3.3
D. ID 10.0.2.4
Answer: B

Juniper dump   JN0-643   JN0-643   JN0-643덤프

NO.9 Click the Exhibit button.
Based on the output shown in the exhibit, which protocol is configured?
A. MSTP
B. RSTP
C. STP
D. VSTP
Answer: D

Juniper   JN0-643최신덤프   JN0-643   JN0-643

NO.10 Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the SRX
Series platform.?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C

Juniper   JN0-643   JN0-643   JN0-643

NO.11 Click the Exhibit button.
A user on port ge-0/0/12 fails an 802.1x authentication attempt.
What is the next action of Switch A?
A. It puts the Authenticator in the HELD status where all EAPOL packets are discarded until the default
hold timer expires.
B. It communicates with the RADIUS server to confirm the user's password.
C. It transmits an EAP-Identity-Request packet immediately after it sends out EAP-Failure.
D. It tries to authenticate the user using MAC radius authentication.
Answer: C

Juniper   JN0-643   JN0-643   JN0-643   JN0-643덤프

NO.12 Click the Exhibit button.
Referring to the output in the exhibit, why does the router prefer the path toward interface ge0/0/0.0 for the
20.0.0.0/8 route?
A. The origin is IGP.
B. The origin is unknown.
C. The AS path is longer.
D. Multihop is enabled.
Answer: A

Juniper   JN0-643자료   JN0-643인증

NO.13 A medium-sized enterprise has some devices that are 802.1X capable and some that are not. Any
device that fails authentication must be provided limited access through a VLAN called NONAUTH. How
do you provide this access?
A. Configure NONAUTH VLAN as the guest VLAN.
B. Configure NONAUTH VLAN as the server-reject VLAN.
C. Configure NONAUTH VLAN as the guest VLAN and the server-reject VLAN
D. Configure a separate VLAN for each type of user: 802.1X and non-802.1X.
Answer: C

Juniper인증   JN0-643시험문제   JN0-643   JN0-643덤프

NO.14 Click the Exhibit button.
In the exhibit, which statement about the ABR between Area 8 and Area 2 is true?
A. The router has connectivity to all areas.
B. The router has connectivity to Area 8 only.
C. The router has connectivity to Area 2 only.
D. The router has connectivity to all routers in Area 8 and Area 2.
Answer: D

Juniper   JN0-643   JN0-643   JN0-643자격증

NO.15 If your WAN-edge router is multihomed to different ISPs, which two BGP attributes would you modify to
affect outbound traffic? (Choose two.)
A. MED
B. origin
C. local preference
D. community
Answer: B,C

Juniper dumps   JN0-643   JN0-643   JN0-643자격증

ITexamdump의 JN0-730덤프의 VCE테스트프로그램과 C_TSCM62_65덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-415시험에 대비한 고품질 덤프와 000-400시험 최신버전덤프를 제공해드립니다. 최고품질 100-500시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/JN0-643.html

댓글 없음:

댓글 쓰기