ITExamDump 는 아주 우수한 IT인증자료사이트입니다. 우리ITExamDump에서 여러분은SAP C-TSCM42-64인증시험관련 스킬과시험자료를 얻을수 있습니다. 여러분은 우리ITExamDump 사이트에서 제공하는SAP C-TSCM42-64관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 그리고ITExamDump에서는SAP C-TSCM42-64자료구매 후 추후 업데이트되는 동시에 최신버전을 무료로 발송해드립니다. 우리는SAP C-TSCM42-64인증시험관련 모든 자료를 여러분들에서 제공할 것입니다. 우리의 IT전문 팀은 부단한 업계경험과 연구를 이용하여 정확하고 디테일 한 시험문제와 답으로 여러분을 어시스트 해드리겠습니다.
ITExamDump사이트에서 제공하는SAP 인증C-TSCM42-64 덤프의 일부 문제와 답을 체험해보세요. 우리 ITExamDump의 를SAP 인증C-TSCM42-64 덤프공부자료를 선택해주신다면 우리는 최선을 다하여 여러분이 꼭 한번에 시험을 패스할 수 있도록 도와드리겠습니다.만약 여러분이 우리의 인증시험 덤프를 보시고 시험이랑 틀려서 패스를 하지 못하였다면 우리는 무조건 덤프비용 전부를 환불해드릴것입니다. ITExamDump제품으로 자격증을 정복합시다!
시험 번호/코드: C-TSCM42-64
시험 이름: SAP (SAP Certified Application Associate - Production - Planning & Manufacturing with SAP ERP 6.0 EHP4)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 80 문항
업데이트: 2013-10-20
C-TSCM42-64인증시험은SAP인증시험중의 하나입니다.그리고 또한 비중이 아주 큰 인증시험입니다. 그리고SAP C-TSCM42-64인증시험 패스는 진짜 어렵다고 합니다. 우리ITExamDump에서는 여러분이C-TSCM42-64인증시험을 편리하게 응시하도록 전문적이 연구팀에서 만들어낸 최고의C-TSCM42-64덤프를 제공합니다, ITExamDump와 만남으로 여러분은 아주 간편하게 어려운 시험을 패스하실 수 있습니다,
빨리 ITExamDump 덤프를 장바구니에 넣으시죠. 그러면 100프로 자신감으로 응시하셔서 한번에 안전하게 패스하실 수 있습니다. 단 한번으로SAP C-TSCM42-64인증시험을 패스한다…… 여러분은 절대 후회할 일 없습니다.
C-TSCM42-64 덤프무료샘플다운로드하기: http://www.itexamdump.com/C-TSCM42-64.html
NO.1 The master data for an in-house production process is to be set up in the SAP ECC system. To
do this, you should create a suitable routing that plans for five operations in an initial sequence
(10,20, 30, 40, 50). There should be an option of relocating operations 30 and 40 to a second
sequence on other work centers if there are capacity bottlenecks. What sequence type would you
use to create the second sequence in the system?
A. Substitute sequence
B. Alternative sequence
C. Parallel sequence
D. Standard sequence
Answer: B
SAP pdf C-TSCM42-64 C-TSCM42-64 C-TSCM42-64 C-TSCM42-64 pdf
NO.2 Which of the following activities is necessary for the capacity availability check to be carried
out automatically when a production order is released?
A. Activate the availability check and assign a checking rule to the work center for the operation to
be checked.
B. Activate the availability check and assign the check control to the plant.
C. Activate the availability check and assign an overall profile in check control for the business
function order release.
D. Activate the availability check and assign an availability checking group to the material master
for the product to be produced.
Answer: C
SAP pdf C-TSCM42-64최신덤프 C-TSCM42-64
NO.3 The user you advise requests that you make it possible for the user to produce materials for
stock,for customer orders, projects, orders and cost centers with production orders.
Where can you make settings to ensure these options?
A. Serial number profile.
B. Settlement profile.
C. Valuation variant.
D. Production scheduling profile.
Answer: B
SAP시험문제 C-TSCM42-64 dumps C-TSCM42-64시험문제 C-TSCM42-64최신덤프 C-TSCM42-64인증 C-TSCM42-64
NO.4 A customer has been using planning strategies 30 (production by lots) and 10 (anonymous
maketo-stock production) in SAP ECC. The customer wishes to move in part to planning strategy 40
(planning with final assembly). The issue of consumption has an effect here for the first time.
Which properties apply for consumption with planning strategy 40? (Choose two.)
A. Consumption can lead to an increase of the originally planned overall production quantity.
B. Consumption can result in the subsequent specification and adjustment of planning elements in
terms of quantity and date, by means of customer orders that arrive.
C. Consumption can reduce the originally planned production quantity.
D. Consumption creates a static and binding assignment, between the planned independent
requirements recorded in advance and the customer requirements that arrive, for the entire
procurement process.
Answer: A,B
SAP C-TSCM42-64 C-TSCM42-64자료 C-TSCM42-64 C-TSCM42-64
NO.5 In the SAP ECC system, a material is produced with the help of production orders. Though
originally used for rate-based planning only, the planning table is to be used to plan this material.
On the initial screen of the planning table, you select this material and then receive a message
informing you that you cannot use the planning table for this material.
Which one of the following reasons for this message applies?
A. The series production indicator has not been set.
B. There is no valid production version for this material.
C. There are no planned orders or production orders present.
D. There are no requirements present.
Answer: B
SAP C-TSCM42-64 C-TSCM42-64자료 C-TSCM42-64 C-TSCM42-64기출문제 C-TSCM42-64자료
NO.6 Which of the following requirements for a manufacturing plant can be supported by using
process
manufacturing? (Choose three.)
A. Master recipe-based manufacturing.
B. Material requirements planning for production resources.
C. Manufacturing without orders.
D. Variable calculation of material quantities (product output, material usage).
E. Manufacturing in charge quantities.
Answer: A,D,E
SAP덤프 C-TSCM42-64시험문제 C-TSCM42-64 C-TSCM42-64 C-TSCM42-64
NO.7 The company that you advise does not want to manage certain value-intensive materials in
the warehouse stock. Instead, the user wishes to control material provision in such a way that these
materials are procured directly for the production and/or process order. How can you fulfill this
request? (Choose two.)
A. Using the special procurement key subcontracting in the material master for the component
B. Using the special procurement key direct procurement/external procurement in the material
master for the component
C. Using the item type non-stock item in the bill of material for the material in question
D. Using the procurement type external procurement in the material master for the component
E. Controlling the material in question as a co-product
Answer: B,C
SAP dumps C-TSCM42-64 C-TSCM42-64 dump C-TSCM42-64 dump
NO.8 An enterprise based in the USA produces an end product that is used with the unit of
measure"pound" (LB). The material is now to be marketed in the EU. A prerequisite for this is that
the material can be sold with the unit kilogram (KG).
Which of the following solutions does SAP ECC offer?
A. In the basic data customizing, you create a unit of measure group that converts pounds to
kilograms. You then assign this to the material master on basic data view 1.
B. You create a new material with a reference to the original material and assign the metric unit of
measure to the new material master.
C. In the material master, you create a conversion factor for converting pounds to kilograms on
basic data view 1.
D. There is no need to take any action. There is a general conversion in the central customizing of
units of measurements, so that automatic conversion of pounds to kilograms takes place.
Answer: D
SAP자료 C-TSCM42-64 pdf C-TSCM42-64 C-TSCM42-64
NO.9 Which one of the following scheduling types cannot be assigned as default to an order type
(production order)?
A. Midpoint
B. Forward
C. Only capacity requirements
D. Backward
Answer: A
SAP인증 C-TSCM42-64 C-TSCM42-64 C-TSCM42-64 C-TSCM42-64 dumps
NO.10 In your company planning strategies are used in the SAP-ECC demand management that are
based on consumption. Which of the following statements about consumption is true? (Choose
two.)
A. A consumption situation is dynamic and is always restructured with the planning run.
B. Consumption can also take place between order reservations and planned independent
requirements, depending on the strategy.
C. Consumption always takes place on the material level between the planned independent
requirements and the planned orders.
D. The consumption parameters (consumption mode and consumption interval) can be set in the
material master or in the MRP group.
Answer: B,D
SAP dump C-TSCM42-64 dumps C-TSCM42-64 C-TSCM42-64 C-TSCM42-64최신덤프
ITexamdump의 MB2-866덤프의 VCE테스트프로그램과 ST0-202덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 JN0-533시험에 대비한 고품질 덤프와 E20-553시험 최신버전덤프를 제공해드립니다. 최고품질 70-561시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기