000-918 덤프 IBM 자격증

우리ITExamDump 에서 여러분은 아주 간단히IBM 000-918시험을 패스할 수 있습니다. 만약 처음IBM 000-918시험에 도전한다면 우리의IBM 000-918시험자료를 선택하여 다운받고 고부를 한다면 생가보다는 아주 쉽게IBM 000-918시험을 통과할 수 있으며 무엇보다도 시험시의 자신감 충만에 많은 도움이 됩니다. 다른 자료판매사이트도 많겠지만 저희는 저희 자료에 자신이 있습니다. 우리의 시험자료는 모두 하이퀼러티한 문제와 답으로 구성되었습니다, 그리고 우리는 업데트를 아주 중요시 생각하기에 어느 사이트보다 더 최신버전을 보실 수 잇을것입니다. 우리의IBM 000-918자료로 자신만만한 시험 준비하시기를 바랍니다. 우리를 선택함으로 자신의 시간을 아끼는 셈이라고 생각하시면 됩니다.IBM 000-918로 빠른시일내에 자격증 취득하시고IBMIT업계중에 엘리트한 전문가되시기를 바랍니다.

취직을 원하시나요? 승진을 원하시나요? 연봉인상을 원하시나요? 무엇을 원하시든 국제적으로 인정받은 IT인증자격증을 취득하는것이 길입니다. IBM인증 000-918시험은 널리 인정받는 인기자격증의 시험과목입니다. IBM인증 000-918시험을 패스하여 자격증을 취득하면 소원이 이루어집니다. ITExamDump의IBM인증 000-918덤프는 시험패스율이 높아IBM인증 000-918시험준비에 딱 좋은 공부자료입니다. ITExamDump에서 덤프를 마련하여 자격증취득에 도전하여 인생을 바꿔보세요.

ITExamDump 는 아주 우수한 IT인증자료사이트입니다. 우리ITExamDump에서 여러분은IBM 000-918인증시험관련 스킬과시험자료를 얻을수 있습니다. 여러분은 우리ITExamDump 사이트에서 제공하는IBM 000-918관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 그리고ITExamDump에서는IBM 000-918자료구매 후 추후 업데이트되는 동시에 최신버전을 무료로 발송해드립니다. 우리는IBM 000-918인증시험관련 모든 자료를 여러분들에서 제공할 것입니다. 우리의 IT전문 팀은 부단한 업계경험과 연구를 이용하여 정확하고 디테일 한 시험문제와 답으로 여러분을 어시스트 해드리겠습니다.

ITExamDump전문가들은IBM 000-918인증시험만을 위한 특별학습가이드를 만들었습니다.IBM 000-918인증시험을 응시하려면 30분이란 시간만 투자하여 특별학습가이드로 빨리 관련지식을 장악하고,또 다시 복습하고 안전하게IBM 000-918인증시험을 패스할 수 잇습니다.자격증취득 많은 시간과 돈을 투자한 분들보다 더 가볍게 이루어졌습니다

시험 번호/코드: 000-918

시험 이름: IBM (System Administration for IBM Informix Dynamic Server V11)

ITExamDump에서 최고최신버전의IBM인증000-918시험덤프 즉 문제와 답을 받으실 수 있습니다. 빨리 소지한다면 좋겠죠. 그래야 여러분은 빨리 한번에IBM인증000-918시험을 패스하실 수 있습니다.IBM인증000-918관련 최고의 자료는 현재까지는ITExamDump덤프가 최고라고 자신 있습니다.

000-918 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-918.html

NO.1 Both standard and temporary dbspaces are listed in the DBSPACETEMP configuration parameter or
environment variable. Which rule applies?
A. Sort, backup, implicit, and non-logging explicit temporary tables are created in temporary dbspaces if
adequate space
exists.
B. Backup, implicit, and non-logging explicit temporary tables are created in temporary dbspaces if
adequate space exists. Sort temporary tables are specified by the PSORT_DBTEMP environment
variable.
C. Sort, backup, implicit, and non-logging explicit temporary tables are created in all available dbspaces if
adequatespace exists.
D. Explicit temporary tables created without the WITH NO LOG option are created in the root dbspace.
Answer:A

IBM   000-918   000-918   000-918   000-918 dumps

NO.2 Which command would be used to monitor disk activity per chunk?
A. onstat -g iog
B. onstat -d
C. onstat -g iof
D. onstat -F
Answer: C

IBM   000-918   000-918   000-918시험문제   000-918

NO.3 A database administrator uses the following onconfig parameters:
TAPEDEV = /foo/resdev
How will this affect ontape backup?
A. ontape will use the directory /foo/resdev if it exists for storage space backup.
B. ontape will use the definitions for TAPEBLK from the file /foo/resdev.
C. ontape will write an informational message to the file /foo/resdev.
D. ontape will use the definitions for TAPESIZE from the file /foo/resdev.
Answer:A

IBM   000-918   000-918   000-918최신덤프   000-918

NO.4 You detected excessive memory usage that might be caused by a memory leak in the application.
Which twocommands would be useful in this scenario? (Choose two.)
A. onstat -u
B. onstat -g sql -r 120
C. onstat -g ses -r 60
D. onstat -g mgm
E. onstat -g mem
Answer: CE

IBM최신덤프   000-918기출문제   000-918   000-918

NO.5 Which two parameters influence the total size of the resident portion of shared memory? (Choose
two.)
A. RESIDENT
B. BUFFERS
C. LOCKS
D. SHMBASE
E. PHYSBUFF
Answer: CE

IBM   000-918인증   000-918   000-918   000-918인증

NO.6 What will the setting "SQLTRACE level=LOW,ntraces=2000,size=2,mode=global" within the Informix
onconfig file record?
A. statement statistics, statement text, and list of table names
B. statement text, host variables, and statement iterators
C. statement statistics, statement text, and statement iterators
D. statement text, statement iterators, and database name
Answer: C

IBM   000-918시험문제   000-918덤프   000-918 dumps

NO.7 When determining the physical log size, what should you consider?
A. RTO_SERVER_RESTART configuration parameter
B. DYNAMIC_LOGS configuration parameter
C. PHYSBUFF configuration parameter
D. LOGFILES configuration parameter
Answer:A

IBM dump   000-918   000-918

NO.8 Which two statements are true for an hierarchical routing topology when setting up SQLHOSTS
server group?(Choose two.)
A. Root and nonroot servers only need to maintain their leaf node server groups.
B. Root and nonroot servers must each maintain all server groups within the enterprise.
C. Enterprise Replication will transmit exactly the SQLHOSTS information, there is no need to maintain
them.
D. Each leaf server must have SQLHOSTS information only for itself and its parent.
E. SQLHOSTS entries for nodes that do not directly connect are not required.
Answer: BD

IBM   000-918   000-918

NO.9 Which type of backup and restore (BAR) utility would be suited for restoring a single table from a level 0
backup to a specific point in time?
A. onbar
B. ontape
C. archecker
D. onarchive
Answer: C

IBM   000-918자격증   000-918   000-918   000-918

NO.10 An Informix database server has been configured with the following parameters:
BAR_MAX_BACKUP 5
BAR_NB_XPORT_COUNT 4
BAR_XFER_BUF_SIZE 10
How many data buffers will be created during an onbar parallel backup attempt?
A. 50
B. 20
C. 40
D. 25
Answer: B

IBM덤프   000-918기출문제   000-918   000-918   000-918기출문제

NO.11 Click the Exhibit button.
In the exhibit, how does an IDS database administrator or programmer ensure that only committed data
will be seen and that no locking errors will occur?
<e ip="918-a-3.jpg"></e>
A. Change user 1 isolation level to dirty read.
B. Change user 2 isolation level to dirty read.
C. Change user 1 isolation level to committed read last committed.
D. Change user 2 isolation level to committed read last committed.
Answer: D

IBM기출문제   000-918   000-918   000-918   000-918 dump

NO.12 Given the following message log information:
15.56:29 Physical Recovery Started at Page (1:1210).
15:56:29 Physical Recovery Complete: 147 Pages Examined, 10 Pages Restored.
15:56:29 Logical Recovery Started.
15:56:29 10 recovery worker threads will be started.
15:56:32 Logical Recovery has reached the transaction cleanup phase.
15:56:32 Logical Recovery Complete.
5 Committed, 2 Rolled Back, 0 Open, 0 Bad Locks
What would be the reason for the difference in 'Pages Examined' and 'Pages Restored' during physical
recovery?
A. The database server might physically log a page image multiple times between checkpoints.
B. The physical recovery restores only the first logged page image.
C. It is an expected behavior.
D. The physical log size is too large.
Answer:A

IBM자격증   000-918기출문제   000-918기출문제   000-918   000-918

NO.13 The table called "state" has lock mode set to row within an unbuffered logged database. The onconfig
file has
USELASTCOMMITTED 'COMMITTED READ' set. One user session has run the following:
begin work;
select * from state where code = "AK";
update state set sname = "ALASKA" where code = "AK";
The results from the SQL select statement run by user one was:
AK Alaska
Session two runs the following (session one is still connected):
set isolation to dirty read;
select * from state where code = "AK";
What will session two see when they run the above SQL statements?
A. AK and Alaska
B. AK and ALASKA
C. Error code 244 and isam 107.
D. The session waits until user one is finished processing.
Answer: B

IBM dump   000-918기출문제   000-918기출문제   000-918 dump

NO.14 Given the following 'onstat -g arc' information:
IBM Informix Dynamic Server Version 11.10.FC1 -- On-Line -- Up 45:18:13 -- 38912 Kbytes
num DBSpace Q Size Q Len Buffer partnum size scanner
Dbspaces - Archive Status
name number level date log log-position
rootdbs 1 0 02/11/2007.22:01 43 0x5338c
1 02/14/2007.22:01 66 0x1b2e8
2 02/16/2007.22:01 75 0x1d2e8
dbs1 2 0 02/14/2007.22:01 43 0x5338c
1 02/14/2007.22:01 66 0x1b2e8
2 02/16/2007.22:01 75 0x1d2e8
On February 16, 2007, at 1:00 PM, a chunk in dbspace bs1 encountered hardware failure.
Which method will restore all of the data, to the point of failure, to a replacement disk drive?
A. a level 0 and 2 restore followed by a logical log restore
B. a level 0 and 1 restore only
C. a level 0 and 1 restore followed by a logical log restore
D. a level 0, 1, and 2 restore followed by a logical log restore
Answer: C

IBM dumps   000-918기출문제   000-918   000-918

NO.15 Which two protocols are used on a Linux platform for IPC connections? (Choose two.)
A. fast fiber
B. shared memory
C. stream pipe
D. named pipe
E. local loopback
Answer: BC

IBM덤프   000-918   000-918   000-918최신덤프   000-918최신덤프

NO.16 A user wants to save SQL explain output to the file: /tmp/myexplain.out. Which syntax should be used?
A. set explain on file to /tmp/myexplain.out
B. set explain on file /tmp/myexplain.out
C. set explain file /tmp/myexplain.out
D. set explain file to /tmp/myexplain.out
Answer: D

IBM pdf   000-918   000-918   000-918자료   000-918자료   000-918

NO.17 An IDS server has its LRU_MIN_DIRTY set to 1 and its LRU_MAX_DIRTY set to 2. Occasionally the
checkpointblocks user transactions from doing updates to the database for too long. How should the
database administrator correct
this situation?
A. Set onconfig parameter AUTO_CKPT to 1 and follow any advice in online.log.
B. Increase the number of page cleaners (i.e. flushers).
C. Increase the buffer pool size.
D. Set the onconfig parameter RTO_SERVER_RESTART to "on".
Answer:A

IBM pdf   000-918   000-918자료   000-918

NO.18 Which memory area is used for log records for smart objects?
A. virtual portion of shared memory
B. logical log buffers
C. /tmp
D. DBSPACETEMP
Answer: B

IBM덤프   000-918기출문제   000-918 pdf   000-918덤프   000-918덤프

NO.19 You are receiving an error when trying to drop a chunk that you think is empty. Which command will
show you if any object is still allocating part of the chunk?
A. oncheck -pe
B. onstat -d
C. oncheck -cD
D. oncheck -cc
Answer:A

IBM기출문제   000-918자격증   000-918   000-918

NO.20 Click the Exhibit button.
Given the sqexplain output in the exhibit, which SQL statement will make the est_rows column accurate?
<e ip="918-a-1.jpg"></e>
A. update statistics high for table
B. update statistics high for systables
C. update statistics high for table orders
D. update statistics high for table customer
Answer:A

IBM dumps   000-918자료   000-918덤프

ITExamDump의 IBM인증 000-918시험덤프자료는 IT인사들의 많은 찬양을 받아왔습니다.이는ITExamDump의 IBM인증 000-918덤프가 신뢰성을 다시 한번 인증해주는것입니다. IBM인증 000-918시험덤프의 인기는 이 시험과목이 얼마나 중요한지를 증명해줍니다. ITExamDump의 IBM인증 000-918덤프로 이 중요한 IT인증시험을 준비하시면 우수한 성적으로 시험을 통과하여 인정받는 IT전문가로 될것입니다.