CompTIA 인증 PD1-001 덤프

현재 많은 IT인사들이 같은 생각하고 잇습니다. 그것은 바로CompTIA PD1-001인증시험자격증 취득으로 하여 IT업계의 아주 중요한 한걸음이라고 말입니다.그만큼CompTIA PD1-001인증시험의 인기는 말 그대로 하늘을 찌르고 잇습니다,

지금 같은 상황에서 몇년간CompTIA PD1-001시험자격증만 소지한다면 일상생활에서많은 도움이 될것입니다. 하지만 문제는 어떻게CompTIA PD1-001시험을 간단하게 많은 공을 들이지 않고 시험을 패스할것인가이다? 우리ITExamDump는 여러분의 이러한 문제들을 언제드지 해결해드리겠습니다. 우리의PD1-001시험마스터방법은 바로IT전문가들이제공한 시험관련 최신연구자료들입니다. 우리ITExamDump 여러분은PD1-001시험관련 최신버전자료들을 얻을 수 있습니다. ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.

시험 번호/코드: PD1-001

시험 이름: CompTIA (CompTIA PDI+ Beta Exam)

ITExamDump선택으로CompTIA PD1-001시험을 패스하도록 도와드리겠습니다. 우선 우리ITExamDump 사이트에서CompTIA PD1-001관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는CompTIA PD1-001덤프로 시험 준비하세요. 만약 시험에서 떨어진다면 덤프전액환불을 약속 드립니다.

ITExamDump의CompTIA인증 PD1-001덤프는 인터넷에서 검색되는CompTIA인증 PD1-001시험공부자료중 가장 출중한 시험준비 자료입니다. CompTIA인증 PD1-001덤프를 공부하면 시험패스는 물론이고 IT지식을 더 많이 쌓을수 있어 일거량득입니다.자격증을 취득하여 자신있게 승진하여 연봉협상하세요.

PD1-001 덤프무료샘플다운로드하기: http://www.itexamdump.com/PD1-001.html

NO.1 A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A.disconnect the MFD and ping the IP address.
B.disconnect the MFD and ping the subnet mask.
C.disconnect the MFD and ping the loopback address.
D.run the ipconfig command from the command prompt.
Answer: A

CompTIA   PD1-001 dumps   PD1-001   PD1-001

NO.2 Which of the following components is part of the ink dispersion system?
A.Print Heads
B.Cleaning heads
C.Pickup Roller
D.Charge Assembly
Answer: A

CompTIA   PD1-001   PD1-001 pdf   PD1-001   PD1-001

NO.3 Which of the following utilities could be used to determine a subnet mask?
A.PING
B.NSLOOKUP
C.TRACERT
D.IPCONFIG
Answer: D

CompTIA최신덤프   PD1-001 dump   PD1-001자료   PD1-001   PD1-001

NO.4 A customer has installed a new computer on their network. They can print to the printer but the option
for duplex printing is not available. All other computers have the option. Which of the following is the
cause of the problem?
A.The new computer is printing to the wrong IP address.
B.The new computer is using the wrong protocol.
C.The driver port is not setup correctly.
D.The option has not been selected on the driver.
Answer: D

CompTIA   PD1-001 dump   PD1-001 dump   PD1-001 dumps   PD1-001

NO.5 Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A.Check the printers error log, and then inform the primary user what the issue is.
B.Go directly to the printer and investigate any issues that are found.
C.Investigate the printers status, then ask the primary user to write down what they think is wrong.
D.Gather information from the primary user, and then evaluate the printers condition.
Answer: D

CompTIA덤프   PD1-001   PD1-001자격증   PD1-001

NO.6 The polygon mirror is located in which of the following components?
A.Developer unit
B.Scanner unit
C.Fuser unit
D.Laser unit
Answer: D

CompTIA   PD1-001인증   PD1-001   PD1-001   PD1-001

NO.7 A polygon mirror is part of which of the following assemblies?
A.Laser unit
B.Developer unit
C.Charge assembly
D.Fuser assembly
Answer: A

CompTIA   PD1-001자료   PD1-001   PD1-001   PD1-001

NO.8 Which of the following functions is associated with the developer unit?
A.Supplies toner to the photoconductor
B.Charges the surface of the photoconductor
C.Writes the latent image on the photoconductor
D.Cleans the photoconductor
Answer: A

CompTIA덤프   PD1-001   PD1-001   PD1-001   PD1-001 dump

NO.9 Which of the following is the purpose of a torque limiter in a roller?
A.To reduce wear and tear on rollers.
B.To provide resistance but still allow some slippage.
C.To limit the amount of movement by media.
D.To make it easier to replace rollers.
Answer: B

CompTIA   PD1-001   PD1-001최신덤프   PD1-001시험문제   PD1-001 dump   PD1-001

NO.10 When is it advisable to dump the waste toner from a technicians service vacuum?
A.When it is full.
B.It is not recommended.
C.Before performing preventative maintenance.
D.After each call.
Answer: B

CompTIA   PD1-001   PD1-001   PD1-001인증

NO.11 During the photoconductor preparation step, residual charge can be removed by which of the
following? (Select TWO).
A.Pressure
B.Oil
C.Light
D.Gravity
E.Electrical Charge
Answer: CE

CompTIA   PD1-001자격증   PD1-001인증   PD1-001 dumps   PD1-001자료

NO.12 An encoder sensor typically detects:
A.paper position.
B.shaft rotation.
C.magnetic flux.
D.laser beam strength.
Answer: B

CompTIA   PD1-001 dumps   PD1-001   PD1-001   PD1-001

NO.13 Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A.Writing
B.Fusing
C.Development
D.Transfer
Answer: C

CompTIA dump   PD1-001최신덤프   PD1-001

NO.14 Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A.Green
B.Magenta
C.Yellow
D.Black
Answer: B

CompTIA   PD1-001   PD1-001자료   PD1-001   PD1-001기출문제   PD1-001 dumps

NO.15 In which of the following sections of an MFP would a technician find a Xenon Lamp?
A.The paper feed section
B.The fuser section
C.The scanner section
D.The transfer section
Answer: C

CompTIA자격증   PD1-001기출문제   PD1-001덤프   PD1-001

NO.16 The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A.Clean the scanner glass on the distant machine.
B.Clean the scanner glass on the local machine.
C.Clean the printer head on the local machine.
D.Call the telephone company to increase the line signal level.
Answer: A

CompTIA   PD1-001   PD1-001   PD1-001최신덤프   PD1-001기출문제

NO.17 A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A.Media feed rollers
B.Cassette drawers
C.Fusing section
D.Device log data
Answer: D

CompTIA   PD1-001   PD1-001최신덤프   PD1-001

NO.18 The proper safety guidelines for handling any device specific consumables can be found in which of
the following documentation?
A.Material Safety Data Sheets
B.Installation Guides
C.Consumer Reports
D.Devices Parts Catalog
Answer: A

CompTIA   PD1-001   PD1-001 dump   PD1-001 dump   PD1-001기출문제   PD1-001

NO.19 Which of the following is a reason black toner is used in color printers?
A.It decreases the print speed in color laser printers.
B.It prevents moir patterns when printing color photographs.
C.It reduces the cost per page when printing gray scale documents.
D.It makes the color toner resistant to smudging when wet.
Answer: C

CompTIA   PD1-001인증   PD1-001   PD1-001

NO.20 How many CCDs are located in a single pass duplex ADF?
A.One
B.2
C.3
D.4
Answer: B

CompTIA인증   PD1-001기출문제   PD1-001자격증   PD1-001

ITExamDump의CompTIA인증 PD1-001 덤프는 수많은 시험준비 공부자료 중 가장 믿음직합니다. ITExamDump의 인지도는 업계에 널리 알려져 있습니다. CompTIA인증 PD1-001덤프로CompTIA인증 PD1-001시험을 준비하여 한방에 시험패스한 분이 너무나도 많습니다. CompTIA인증 PD1-001덤프는 실제CompTIA인증 PD1-001시험문제에 초점을 맞추어 제작한 최신버전 덤프로서 시험패스율이 100%에 달합니다.