여러분은 먼저 우리 ITExamDump사이트에서 제공되는HP인증HP0-207시험덤프의 일부분인 데모를 다운받으셔서 체험해보세요. ITExamDump는 여러분이 한번에HP인증HP0-207시험을 패스하도록 하겠습니다. 만약HP인증HP0-207시험에서 떨어지셨다고 하면 우리는 덤프비용전액 환불입니다.
ITExamDump의 덤프선택으로HP HP0-207인증시험에 응시한다는 것 즉 성공과 멀지 않았습니다. 여러분의 성공을 빕니다.
우리ITExamDump에는 아주 엘리트한 전문가들로 구성된 팀입니다. 우리는 아주 정확하게 또한 아주 신속히HP HP0-207관한 자료를 제공하며, 업데이트될경우 또한 아주 빠르게 뉴버전을 여러분한테 보내드립니다. ITExamDump는 관련업계에서도 우리만의 브랜드이미지를 지니고 있으며 많은 고객들의 찬사를 받았습니다. 현재HP HP0-207인증시험패스는 아주 어렵습니다, 하지만 ITExamDump의 자료로 충분히 시험 패스할 수 있습니다.
ITExamDump의 HP인증HP0-207시험대비덤프는 실제시험문제 출제경향을 충분히 연구하여 제작한 완벽한 결과물입니다.실제시험문제가 바뀌면 덤프를 제일 빠른 시일내에 업데이트하도록 하기에 한번 구매하시면 1년동안 항상 가장 최신의HP인증HP0-207시험덤프자료를 제공받을수 있습니다.
시험 번호/코드: HP0-207
시험 이름: HP (Procurve Adaptive EDGE Fundamentals)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 120 문항
업데이트: 2014-03-19
ITExamDump는 IT업계에서 유명한 IT인증자격증 공부자료를 제공해드리는 사이트입니다. 이는ITExamDump 의 IT전문가가 오랜 시간동안 IT인증시험을 연구한 끝에 시험대비자료로 딱 좋은 덤프를 제작한 결과입니다. HP인증 HP0-207덤프는 수많은 덤프중의 한과목입니다. 다른 덤프들과 같이HP인증 HP0-207덤프 적중율과 패스율은 100% 보장해드립니다. HP인증 HP0-207시험에 도전하려는 분들은ITExamDump 의HP인증 HP0-207덤프로 시험을 준비할것이죠?
HP0-207 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-207.html
NO.1 You are about to update the software on a ProCurve switch. Which command do you use to view
a list of all software versions stored on the switch?
A.show run
B.show flash
C.show startup
D.show version
Correct:B
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.2 You have been asked to configure IGMP on a ProCurve Switch 6200yl at a customer site. What
are the steps for enabling IGMP on the switch?
A.Enter the manager level, then issue the ip igmp command.
B.Enter the global configuration context, then issue the ip igmp command.
C.Enter the VLAN context for each VLAN that will support IGMP, then issue the ip igmp command.
D.Enter the interface configuration context for each port configured with a VLAN, then issue the ip igmp
command.
Correct:C
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.3 How do ProCurve switches, configured with link aggregation (also known as port trunking),
handle broadcast traffic?
A.Broadcast traffic is flooded through all of the ports in the trunk.
B.The switch sends a query and receives permission from potential receivers before flooding.
C.Broadcast traffic is handled in exactly the same way it would be without port trunking configured.
D.Broadcast traffic is flooded through non-trunked ports, but forwarded only through one of the ports in
the trunk.
Correct:D
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.4 While using the CLI to configure a ProCurve switch, you must change context from the manager
level to the global configuration level. Which command do you use?
A.exit
B.write
C.global
D.enable
E.configure
Correct:E
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.5 While using the CLI to configure a ProCurve switch, you must move from the global
configuration level to the port context configuration level for port a1. Which command do you use?
A.port a1
B.ethernet a1
C.interface a1
D.configure a1
Correct:C
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.6 At a customer site, you have configured four ProCurve switches for HP Switch Meshing and
Multiple Spanning Tree Protocol. How will the mesh appear to non-mesh switches in the same
spanning tree domain?
A.as a single device
B.as a set of devices without redundant links
C.as devices that cannot participate in the spanning tree
D.as a set of devices with spanning tree enabled to block redundant links
Correct:A
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.7 You configured Rapid Spanning Tree Protocol on four ProCurve Switch 5348xl switches at a
customer site. During the configuration, you forgot to configure the switches so that
switch-to-switch links are not defined as edge ports. Which statement describes the consequence
of your oversight?
A.The switches in the spanning tree will elect multiple Root bridges.
B.The switches will reject the spanning tree configuration and block all ports until the configuration is
corrected.
C.The switches will be unable to elect a Root bridge and will not be able to forward traffic until the
configuration is corrected.
D.The switches will require more time to elect the Root bridge and resolve the topology, but the spanning
tree will otherwise function normally.
Correct:D
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.8 While examining the spanning tree configuration on a ProCurve switch, you notice that one of
the ports is in the Blocking state. Which statement describes how this port will function in this
state?
A.The port is completely blocked for all purposes.
B.The switch will not forward user traffic through that port, but will forward telnet traffic.
C.The switch will not forward user traffic through that port, but will forward BPDUs through that port.
D.The switch forwards user traffic through that port, but does not receive user traffic through that port.
Correct:C
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.9 You are about to configure HP Switch Meshing on four ProCurve switches at a customer site.
All of the ports that will be included in the mesh are configured for membership in customer
VLANs. How will the mesh configuration affect the VLAN configuration?
A.The mesh ports will automatically become a tagged member of all configured VLANs.
B.The mesh ports will not be a member of any VLANs until you manually configure its VLAN assignments.
C.The mesh ports will not be 802.1Q-compliant and will only be able to retain membership in a single
untagged VLAN.
D.The mesh ports will automatically become a member of the default VLAN and must be configured for
other VLAN membership.
Correct:A
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.10 What are the key principles of the Adaptive EDGE architecture? Select TWO.
A.Control to the Edge
B.Control to the Desktop
C.Command from the Center
D.Management from Anywhere
E.Security throughout the Network
Correct:A C
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.11 You are assigned to configure ProCurve switches at a customer site for in-band management.
Which are in-band management methods? Select TWO.
A.Telnet
B.SNMP
C.XMODEM
D.serial console
E.menu interface
Correct:A B
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.12 You are installing a ProCurve switch at a customer site and must enable remote management
for network administrators. Which configuration parameter is necessary to ensure that
administrators can manage the switch even if they are on different IP networks?
A.default VLAN
B.default gateway
C.default password
D.default management profile
Correct:B
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.13 You must remotely manage a customer's switch using Telnet. Which configuration/monitoring
interfaces are available? Select TWO.
A.web interface
B.menu interface
C.ProCurve Manager
D.boot monitor interface
E.command line interface
Correct:B E
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.14 How is traffic prioritization accomplished with IEEE 802.1p?
A.802.1Q-compliant devices enforce priorities based on VLAN ID.
B.802.1Q-compliant devices set one of 8 values in a 3-bit field in the VLAN tag.
C.802.1Q-compliant devices set one of 64 values in a 6-bit field in the IP datagram header.
D.802.1Q-compliant devices dedicate a portion of available bandwidth to each prioritized conversation.
Correct:B
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.15 You are implementing a fully connected HP Switch Mesh at a customer site. Which statement
describes a valid design guideline for HP Switch Meshing?
A.A switch may be connected to no more than four mesh domains.
B.Up to five Switch 5400zl Series switches can be included in a full mesh.
C.All links in a full mesh must operate at the same speed and use the same media type.
D.When a switch is configured for HP Switch Meshing protocol, all of the ports on that switch must
participate in the mesh.
Correct:B
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.16 You are configuring a ProCurve Layer 2 switch to obtain time information from an SNTP server
located on a different IP network than the switch. Which configuration steps are necessary on the
switch to enable this functionality?
A.The switch cannot be configured to obtain time information from a server on a different IP network.
B.Define a default gateway for the switch, enable SNTP, use the sntp server command to enter the IP
address of the server.
C.Assign a port on the switch to a VLAN that includes the SNTP server, enable SNTP, configure the
switch for SNTP unicast mode.
D.Configure an IP address on the same IP network as the SNTP server, enable TimeP, configure the
switch for SNTP broadcast mode.
Correct:B
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.17 What are the primary solution categories of the Adaptive EDGE Architecture? Select THREE.
A.mobility
B.security
C.reliability
D.availability
E.upgradeability
F.convergence
G.cost-effectiveness
Correct:A B F
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.18 You must update the software on a customer's ProCurve Switch 5412zl. Which statement
correctly describes the process for this operation? Select TWO.
A.Use TFTP for direct serial transfer of the software.
B.Use FTP for in-band transfer of the software through an IP network.
C.Use TFTP for in-band transfer of the software through an IP network.
D.Transfer the software from your workstation using a direct serial transfer.
E.Instruct the switch to search for any available TFTP server without knowing its IP address.
Correct:C D
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.19 A customer is planning a Power over Ethernet deployment for a large call center that will use
VoIP telephones. While planning the wiring closets for the deployment, the customer suggests
using the uplink ports of a ProCurve Switch 2650-PWR to provide power to a ProCurve Switch
2600-8-PWR. Which statement describes a correct response to this suggestion?
A.It is only possible if the second switch is a ProCurve Switch 2626-PWR.
B.It is not possible because the 2600-8-PWR cannot act as a Powered Device.
C.It is only possible if the customer adds a ProCurve 600 EPS/RPS to the first switch.
D.It is not recommended because the second switch will not have adequate power redundancy.
Correct:B
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
NO.20 On switches that support the Switch Setup screen interface, which parameters can be
configured on the Switch Setup screen? Select TWO.
A.STP bridge priority
B.IP address of the TACACS+ server
C.system name and contact information
D.IP address and subnet mask for each VLAN
E.IP address and subnet mask for the default VLAN
Correct:C E
HP HP0-207자격증 HP0-207 HP0-207 HP0-207 HP0-207
ITexamdump의 1Z0-409덤프의 VCE테스트프로그램과 000-623덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 74-409시험에 대비한 고품질 덤프와 000-585시험 최신버전덤프를 제공해드립니다. 최고품질 350-029시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
시험자료링크: http://www.itexamdump.com/HP0-207.html
