레이블이 630-008인 게시물을 표시합니다. 모든 게시물 표시
레이블이 630-008인 게시물을 표시합니다. 모든 게시물 표시

2014년 5월 15일 목요일

630-006자격증자료, 630-008자격시험

우리 ITExamDump사이트에서 제공되는ISM인증630-006시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보면 우리ITExamDump에 믿음이 갈 것입니다. 우리ITExamDump의 제품을 구매하신다고 하면 우리는 최선을 다하여 여러분들한테 최고의 버전을 제공함으로 한번에ISM인증630-006시험을 패스하도록 하겠습니다. IT시험이라고 모두 무조건 외우고 장악하고 많은 시간을 투자해야만 된다는 사상을 깨게 될 것입니다.

인테넷에 검색하면 ISM 630-008시험덤프공부자료가 헤아릴수 없을 정도로 많이 검색됩니다. 그중에서ITExamDump의ISM 630-008제품이 인지도가 가장 높고 가장 안전하게 시험을 패스하도록 지름길이 되어드릴수 있습니다.

ISM 630-006인증시험은 현재IT업계에서 아주 인기 있는 시험입니다.많은 IT인사들이 관연 자격증을 취득하려고 노력하고 있습니다.ISM 630-006인증시험에 대한 열기는 식지 않습니다.ISM 630-006자격증은 여러분의 사회생활에 많은 도움이 될 것이며 연봉상승 등 생활보장에 업그레이드 될 것입니다.

시험 번호/코드: 630-006
시험 이름: C.P.M. Module 2: Supply Environment
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 630-006자격증
100% 합격율 보장
Q&A: 285 문항 630-006시험문제
업데이트: 2014-05-14

630-006자격증: >>펼쳐보기

시험 번호/코드: 630-008
시험 이름: C.P.M. Module 4: Management
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 630-008시험자료
100% 합격율 보장
Q&A: 360 문항 630-008기출문제
업데이트: 2014-05-14

630-008시험자료: >>펼쳐보기

ITExamDump 는 여러분의 IT전문가의 꿈을 이루어 드리는 사이트 입다. ITExamDump는 여러분이 우리 자료로 관심 가는 인중시험에 응시하여 안전하게 자격증을 취득할 수 있도록 도와드립니다. 아직도ISM 인증630-008 인증시험으로 고민하시고 계십니까? ISM 인증630-008인증시험 가이드를 사용하실 생각은 없나요? ITExamDump는 여러분께 시험패스의 편리를 드릴 수 있습니다.

ITExamDump에서 출시한 ISM인증 630-006덤프는ISM인증 630-006시험에 대비하여 IT전문가들이 제작한 최신버전 공부자료로서 시험패스율이 100%입니다.ITExamDump는 고품질 ISM인증 630-006덤프를 가장 친근한 가격으로 미래의 IT전문가들께 제공해드립니다. ITExamDump의 소원대로 멋진 IT전문가도 거듭나세요.

630-006 덤프무료샘플다운로드하기: http://www.itexamdump.com/630-006.html

NO.1 Which of the following phrases are used to refer to the receipt of a functional acknowledgment after
sending a purchase order via EDI?
A. transmission received B. accepted purchase order
C. valid contract exists D. goods have been shipped
Answer: A

ISM자격시험   630-006시험문제   630-006덤프다운   630-006인증   630-006시험문제

NO.2 Which of the following options are key actions that senior management should take into account when
establishing a purchasing department?
A. Select a purchasing system
B. Develop list of suppliers
C. Hire qualified buyers
D. Establish a policies authorizing purchasing authority
Answer: D

ISM덤프   630-006시험정보   630-006시험일정   630-006자료   630-006 PDF

NO.3 Choose two of the following options that are usually amongst the functions of the material manager of?
(Choose two)
A. Stores and receiving
B. Quality control
C. Traffic management
D. Accounts payable
Answer: A, C

ISM최신덤프   630-006기출문제   630-006자료

NO.4 Which of the following approaches focuses on cooperative rather than adversarial relationships with
suppliers?
A. single sourcing
B. cross-functional teams
C. supply base management
D. supplier partnerships
Answer: D

ISM   630-006시험   630-006최신버전덤프

NO.5 If a supplier's level of quality was unsatisfactory on past orders and the level of quality on current
orders is critical, which of the following options would be the BEST way to handle the situation?
A. Timely inspection by the buyer's company at the supplier's plant
B. Requiring the supplier to supply extra products to cover rejects
C. Require 100% inspection before the products leave the warehouse of the order by the buyer's
company's quality control department
D. Label "Quality of Material is Critical" on the purchase order
Answer: A

ISM인증   630-006   630-006기출문제   630-006덤프다운

NO.6 If a manufacturer establishes all the population needed for a round-bar machining process being 5.76
centimeters, with a standard deviation of 15. The acceptable quality limits are estimated at about 3
standard deviations. On day one, the sample means are taken by the operator, 5.80, 5.46, and 6.20
centimeters. These means indicate if the process is
A. controlled
B. reckless
C. statistically perfect
D. leaning towards the lower side of the mean
Answer: A

ISM시험문제   630-006덤프다운   630-006응시료   630-006 IT시험덤프   630-006시험정보

NO.7 .Which of the following BEST defines negotiations?
A. reaching an agreement through discussion
B. maximizing one's position over one's opponent
C. reaching an agreement through competitive bidding
D. ensuring that the terms and conditions of a contract are met
Answer: A

ISM   630-006   630-006 IT자격증   630-006최신덤프

NO.8 In a situation where the purchasing and production departments share responsibility for product
fabrication, lead time for delivery of material, work schedules, and selection of sources of supply. Which
responsibilities would be allocated to the production department? (Choose two.)
A. product fabrication
B. lead time for delivery of material
C. work schedules
D. selection of sources of supply
Answer: A, C

ISM자격증덤프   630-006덤프   630-006자격증덤프   630-006   630-006교재   630-006 IT국제자격증

2013년 12월 16일 월요일

ISM 630-008 인증 덤프

ITExamDump 제공 ISM 630-008시험덤프자료가 광범한 시험준비인사들의 찬양을 받은지 하루이틀일이 아닙니다.이렇게 많은 분들이ITExamDump 제공 ISM 630-008덤프로 시험을 통과하여 자격증을 취득하였다는것은ITExamDump 제공 ISM 630-008덤프가 믿을만한 존재라는것을 증명해드립니다. 덤프에 있는 문제만 열심히 공부하시면 시험통과 가능하기에 시간도 절약해줄수있어 최고의 믿음과 인기를 받아왔습니다. ISM 630-008 시험을 봐야 하는 분이라면ITExamDump를 한번 믿어보세요. ITExamDump도움으로 후회없이 멋진 IT전문가로 거듭날수 있을것입니다.

아무런 노력을 하지 않고 승진이나 연봉인상을 꿈꾸고 있는 분이라면 이 글을 검색해낼수 없었을것입니다. 승진이나 연봉인상을 꿈꾸면 승진과 연봉인상을 시켜주는 회사에 능력을 과시해야 합니다. IT인증시험은 국제적으로 승인해주는 자격증을 취득하는 시험입니다. ITExamDump의ISM인증 630-008덤프의 도움으로 ISM인증 630-008시험을 패스하여 자격증을 취득하면 승진이나 연봉인상의 꿈이 이루어집니다. 결코 꿈은 이루어질것입니다.

ITExamDump선택으로ISM 630-008시험을 패스하도록 도와드리겠습니다. 우선 우리ITExamDump 사이트에서ISM 630-008관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는ISM 630-008덤프로 시험 준비하세요. 만약 시험에서 떨어진다면 덤프전액환불을 약속 드립니다.

한번에ISM인증630-008시험을 패스하고 싶으시다면 완전 페펙트한 준비가 필요합니다. 완벽한 관연 지식터득은 물론입니다. 우리ITExamDump의 자료들은 여러분의 이런 시험준비에 많은 도움이 될 것입니다.

ITExamDump 의 ISM인증 630-008덤프는ISM인증 630-008시험에 도전장을 던진 분들이 신뢰할수 있는 든든한 길잡이 입니다. ISM인증 630-008시험대비 덤프뿐만아니라 다른 IT인증시험에 대비한 덤프자료도 적중율이 끝내줍니다. ISM인증 630-008시험이나 다른 IT인증자격증시험이나ITExamDump제품을 사용해보세요.투자한 덤프비용보다 훨씬 큰 이득을 보실수 있을것입니다.

시험 번호/코드: 630-008
시험 이름: ISM (C.P.M. Module 4: Management)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 360 문항
업데이트: 2013-12-15

630-008 덤프무료샘플다운로드하기: http://www.itexamdump.com/630-008.html

NO.1 Which of the following theories suggests that managers can attain the greatest level
of employee motivation by determining the most desirable outcomes?
A. Theory X.
B. Theory Z.
C. Expectancy theory.
D. Scientific management.
E. Motivation-Hygiene theory.
Answer: C

ISM dumps   630-008   630-008 dumps

NO.2 Which of the following is NOT an advantage of promoting from within the
purchasing organization?
A. Keeping morale high.
B. Reducing training costs.
C. Stimulating individual performance.
D. Bringing experience in complementary areas.
Answer: D

ISM최신덤프   630-008   630-008 dump

NO.3 Which of the following can BEST enhance a measurement and control system for
evaluating buyer performance?
A. Including the buyer in the design of the system.
B. Including human resources in the design of the system.
C. Making a composite measurement of efficiency and effectiveness.
D. Being sufficiently broad in scope to allow the measurement of all contingencies.
Answer: A

ISM   630-008   630-008   630-008 dump

NO.4 You work as a purchasing manager at Certkiller .com. An employee that has been at
Certkiller .com for 20-years has become accustomed to coming to work 30-45
minutes late. Initially, this was due to child-rearing responsibilities, but now is a
simply habit. The supervisor has asked the employee several times if there was a
problem and the answer has always been "no." The problem is beginning to have a
negative impact on the morale of the rest of the department. Which of the following
would be your BEST course of action in this situation?
A. Dismiss the employee.
B. Have the employee attend counseling sessions.
C. Ask the human resources department to intervene and find a solution to the problem.
D. Set goals with the employee to improve on arrival time, and include a written report in
the employee's file.
Answer: D

ISM   630-008   630-008 dumps   630-008   630-008기출문제

NO.5 Which of the following documents is MOST important in transportation?
A. Bill of materials.
B. Bill of lading.
C. Bill of sale.
D. Manifest.
Answer: B

ISM   630-008   630-008   630-008자격증

NO.6 Which of the following is generally NOT strategic in nature?
A. New advertising schedule implementation.
B. New dividend policy direction.
C. New product development.
D. New sources of financing.
Answer: A

ISM   630-008   630-008최신덤프

NO.7 You work as a purchasing manager at Certkiller .com. A female employee has been
working for Certkiller .com for about 12 years and has 3 years to go until her
scheduled retirement. Recently, she was laid off from her position, and her duties
were absorbed by younger workers in the department. Under which of the following
is she MOST likely to have a claim against the company?
A. Equal Employment Opportunity Act.
B. National Labor Relations Act.
C. Age Discrimination Act.
D. Executive Order 11246.
Answer: C

ISM자격증   630-008덤프   630-008   630-008   630-008 pdf

NO.8 Which of the following does profit planning begin?
A. Business plans.
B. Long-range strategic plans.
C. Short-range strategic plans.
D. Strategic and operational plans.
Answer: D

ISM   630-008   630-008   630-008 dumps

NO.9 Under which of the following circumstances is negative feedback appropriate?
A. Soon after the occurrence of the faulty behavior.
B. In the presence of other managerial personnel.
C. In the presence of other team members.
D. It is never appropriate.
Answer: A

ISM자격증   630-008인증   630-008   630-008자격증   630-008

NO.10 Which of the following is NOT an appropriate measure of performance for a
purchasing department?
A. Average time to place requisitions.
B. Total dollars contributed to profits.
C. Total dollars purchased per supplier.
D. Total product cost reduction compared to budget.
Answer: C

ISM기출문제   630-008덤프   630-008시험문제   630-008자격증   630-008인증

NO.11 You work as a purchasing manager at Certkiller .com. You are instructed to reduce
Certkiller .cm's MRO supplier base from 50 to 1. Which of the following would be
your BEST course of action in this situation?
A. Buying at the lowest total cost, consistent with quality and service.
B. Achieving a high degree of cooperation with internal customers.
C. Developing reliable alternatives of supply.
D. Optimizing inventory turnover.
Answer: A

ISM   630-008인증   630-008 dump   630-008

NO.12 Which of the following is NOT a good indicator of purchasing department
performance?
A. Quality rejection rates for major items.
B. Number of purchase orders issued.
C. Percentage of on-time deliveries.
D. Number of stockout situations.
Answer: B

ISM   630-008인증   630-008기출문제   630-008자격증   630-008   630-008

NO.13 Certkiller .com has more than 10,000 employees located on two regional branches
and on several smaller branches. Annual purchases of goods and services for
Certkiller .com exceed $150 million. In which of the following ways would
Certkiller .com LEAST likely benefit from a highly centralized purchasing function?
A. Improvements due to decreased duplication of effort.
B. Adherence to organization-wide standards and objectives.
C. Savings from standardization and improved economies of scale.
D. Satisfaction of product and source preferences for internal customers.
Answer: D

ISM   630-008자격증   630-008자격증   630-008기출문제

NO.14 Which of the following would NOT be included in a typical audit of the purchasing
department in a manufacturing operation?
A. Inspection.
B. Organization policy.
C. Purchasing operations.
D. Inventory management.
Answer: A

ISM dump   630-008   630-008 pdf   630-008

NO.15 Which of the following statements regarding the orientation of a buyer trainee are
FALSE?
A. The trainee should be informed of personal growth opportunities.
B. Orientation and training should be conducted separately during the trainee's initial
months on the job.
C. The trainee should be informed that his/her performance will be evaluated during
orientation and later on.
D. The trainee should be advised of purchasing's major staff and line activities.
Answer: B

ISM   630-008   630-008   630-008   630-008

NO.16 In which of the following defines a situation where objectives are more general at
the top of an organization and become more specific as one moves down the
organization?
A. Hierarchy of objectives.
B. Management By Objectives (MBO).
C. Decision support system.
D. Goal setting.
Answer: A

ISM시험문제   630-008   630-008 dump   630-008인증

NO.17 You work as a purchasing manager at Certkiller .com. One of your buyers tends to
ignore outstanding purchase orders. This has resulted in numerous complaints from
the shop floor asking the buyer to determine order status. Which of the following
would be your BEST course of action in this situation?
A. Inform the buyer to set up a system for follow-up.
B. Computerize the purchasing department operations.
C. Allow shop floor personnel to make their own purchases.
D. Inform the buyer that she will be dismissed if she does not improve her performance.
Answer: B

ISM   630-008덤프   630-008   630-008 pdf   630-008시험문제

NO.18 What is the training method that facilitates the development of organization-wide
skills and requires good interpersonal skills called?
A. Functional rotation.
B. On-the-job training.
C. The "buddy" system.
D. Continuing education.
Answer: A

ISM   630-008기출문제   630-008   630-008최신덤프   630-008 dump

NO.19 Which of the following methods should a purchasing manager use when evaluating
individual employee performance?
A. Performance standards set by the U.S. Department of Labor.
B. The requirements of the job, including position descriptions.
C. Management By Objectives, whether or not the employee helped set the objectives.
D. Uniform company-wide standards of performance developed by the human resources
department.
Answer: B

ISM   630-008 dumps   630-008   630-008

NO.20 Which of the following is LEAST important when evaluating buyer performance?
A. Quality of work.
B. Quantity of work.
C. Personal appearance.
D. Communication skills.
Answer: C

ISM   630-008 dump   630-008   630-008인증   630-008시험문제

ITexamdump의 VCP-510덤프의 VCE테스트프로그램과 200-101덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-323시험에 대비한 고품질 덤프와 000-588시험 최신버전덤프를 제공해드립니다. 최고품질 000-N34시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/630-008.html

2013년 7월 27일 토요일

ISM 인증한 CPSM1 630-007 630-008 630-006 630-005 덤프

우리ITExamDump가 제공하는 최신, 최고의ISM CPSM1 630-007 630-008 630-006 630-005시험관련 자료를 선택함으로 여러분은 이미 시험패스성공이라고 보실수 있습니다.


ISM인증CPSM1 630-007 630-008 630-006 630-005시험을 패스하여 자격증을 취득한다면 여러분의 미래에 많은 도움이 될 것입니다.ISM인증CPSM1 630-007 630-008 630-006 630-005시험자격증은 it업계에서도 아주 인지도가 높고 또한 알아주는 시험이며 자격증 하나로도 취직은 문제없다고 볼만큼 가치가 있는 자격증이죠.ISM인증CPSM1 630-007 630-008 630-006 630-005시험은 여러분이 it지식테스트시험입니다.


영어가 서툴러 국제승인 인기 IT인증자격증 필수시험 과목인ISM인증 CPSM1 630-007 630-008 630-006 630-005시험에 도전할 엄두도 낼수 없다구요? 이런 생각은 이글을 보는 순간 버리세요. ISM인증 CPSM1 630-007 630-008 630-006 630-005시험을 패스하려면ITExamDump가 고객님의 곁을 지켜드립니다. ITExamDump의ISM인증 CPSM1 630-007 630-008 630-006 630-005덤프는 ISM인증 CPSM1 630-007 630-008 630-006 630-005시험패스 특효약입니다. 영어가 서툴러고 덤프범위안의 문제만 기억하면 되기에 영어로 인한 문제는 걱정하지 않으셔도 됩니다.


ITExamDump의ISM인증 CPSM1 630-007 630-008 630-006 630-005 덤프는 수많은 시험준비 공부자료 중 가장 믿음직합니다. ITExamDump의 인지도는 업계에 널리 알려져 있습니다. ISM인증 CPSM1 630-007 630-008 630-006 630-005덤프로ISM인증 CPSM1 630-007 630-008 630-006 630-005시험을 준비하여 한방에 시험패스한 분이 너무나도 많습니다. ISM인증 CPSM1 630-007 630-008 630-006 630-005덤프는 실제ISM인증 CPSM1 630-007 630-008 630-006 630-005시험문제에 초점을 맞추어 제작한 최신버전 덤프로서 시험패스율이 100%에 달합니다.


ITExamDump의ISM인증 CPSM1 630-007 630-008 630-006 630-005덤프는 고객님의 IT인증자격증을 취득하는 소원을들어줍니다. IT업계에 금방 종사한 분은 자격증을 많이 취득하여 자신만의 가치를 업그레이드할수 있습니다. ITExamDump의ISM인증 CPSM1 630-007 630-008 630-006 630-005덤프는 실제 시험문제에 대비하여 연구제작된 퍼펙트한 시험전 공부자료로서 시험이 더는 어렵지 않게 느끼도록 편하게 도와드립니다.


시험 번호/코드: CPSM1

시험 이름: ISM (Foundation of Supply Management)

시험 번호/코드: 630-007

시험 이름: ISM (C.P.M. Module 3: Value Enhancement Strategies)

시험 번호/코드: 630-008

시험 이름: ISM (C.P.M. Module 4: Management)

시험 번호/코드: 630-006

시험 이름: ISM (C.P.M. Module 2: Supply Environment)

시험 번호/코드: 630-005

시험 이름: ISM (C.P.M. Module 1: Purchasing Process)

630-007 덤프무료샘플다운로드하기: http://www.itexamdump.com/630-007.html


NO.1 KillTest has been experiencing numerous stockouts on a production item.
Which of the following is LEAST likely to cause this problem?
A. Faulty sales forecasts.
B. Incorrect order points.
C. Increased supplier prices.
D. Problems with incoming shipments.
Answer. C

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.2 Which of the following do NOT provide economic forecasts?
A. ISM Report On Business(r).
B. Bureau of Labor Statistics.
C. Department of Commerce.
D. Thomas Register.
Answer. D

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.3 Which of the following criteria would a project or process targeted for improvement
generally NOT meet?
A. It is in the process of change.
B. It is relevant to a key product or service issue.
C. It is within the control or influence of the team.
D. It is likely to contribute to organizational goals.
Answer. A

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.4 Which of the following represents the MOST common reason for a public or
nonprofit corporation to use lease/purchase agreements to obtain equipment?
A. To gain tax advantages.
B. To avoid capital expenditures.
C. To reduce maintenance needs.
D. To gain depreciation advantages.
Answer. B

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.5 When would a purchasing manager generally use a third-party lease as a financing
instrument?
A. When purchasing equipment from the manufacturer with someone else's money.
B. When acquiring equipment from one party and maintenance from another.
C. When arranging an assignment agreement with a bank.
D. When transferring the asset to the internal customer.
Answer. A

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.6 Which of the following is NOT an appropriate consideration when seeking to
mitigate seasonal capacity issues?
A. Safety stock levels.
B. Transportation costs.
C. Forecasting accuracy.
D. Seasonal sales forecasts.
Answer. B

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.7 Which of the following should generally make a "make-or-buy" decision?
A. Engineering Management.
B. Purchasing Management.
C. Production Management.
D. General Management.
Answer. D

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.8 Which of the following are the two basic categories of costs associated with
inventories from a management point of view?
A. Supplies and services costs.
B. Storage and incremental costs.
C. Carrying costs and acquisition costs.
D. Obsolescence and deterioration costs.
Answer. C

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.9 Which of the following BEST describes the difference between evaluation of a
product and value analysis?
A. Value analysis is more concerned with "make-or-buy" issues.
B. Evaluation of a product is more concerned with cost issues.
C. Value analysis focuses more on economy and efficiency.
D. Value analysis is more concerned with product liability.
Answer. C

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.10 Which of the following should a purchaser utilize when there is a need to minimize
financial risk in a sensitive market?
A. Cash flow management.
B. Long-term relationships.
C. Market demand analysis.
D. Hedging using futures contracts.
Answer. D

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.11 You work as a purchaser at KillTest. You are negotiating a contract for which
production and delivery will be stretched out over a 24-month period. You want to
get the best price. Which of the following should you include in the contract?
A. A provision to accept all material produced under the contract.
B. A provision to cover changes in rates for material and labor.
C. A provision to eliminate penalties for late deliveries.
D. A provision to cover unforeseen production delays.
Answer. B

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.12 Which of the following represents the BEST strategy for minimizing price risk in a
falling market?
A. Hedging.
B. Forward buying.
C. Hand-to-mouth buying.
D. Buying to requirements.
Answer. C

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.13 Which of the following is the FIRST step in standardization?
A. Collecting data.
B. Simplifying standards.
C. Establishing objectives.
D. Publicizing the program.
Answer. A

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.14 When is the timing of purchases MOST important?
A. When a market has price and supply stability.
B. When a market has price and supply instability.
C. When a market has unstable supply with predictable prices.
D. When a market has reasonably stable supply with substantial fluctuation in prices.
Answer. C

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.15 Which of the following can be used to spot abnormalities in a process, as well as
compare actual measurements to customer or engineering specifications, and show
if a distribution is centered at an expected place?
A. Pareto charts.
B. Area graphs.
C. Histograms.
D. Pie graphs.
Answer. C

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.16 Which of the following statements is FALSE?
A. An operational lease has a non-cancelable term varying from hours to years.
B. An operational lease is a total financial commitment by the lessor.
C. In operational leases, payments are fixed payments per period.
D. Operational leases stress service.
Answer. B

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.17 Which of the following represents the MAIN reason why a fully documented
permanent summary record of a "make-or-buy" analysis should be maintained?
A. To respond to charges of favoritism by unsuccessful bidders.
B. To serve as a useful source of information in future situations.
C. To support cost-of-goods-sold (CGS) figures for tax purposes.
D. To justify the participation of all departments that were involved in the analysis.
Answer. C

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.18 What is generally the PRIMARY motivation for outsourcing in the health care
sector?
A. To reduce technological risk.
B. To shift patient liability.
C. To reduce labor costs.
D. To implement JIT.
Answer. C

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.19 Which of the following favors making the part in a "make-or-buy" decision?
A. When design secrecy is required.
B. When volume requirements are small.
C. When production facilities are limited.
D. When there is a desire to maintain a multiple-source policy.
Answer. A

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007

NO.20 Which of the following is the MOST commonly sought-after piece of inventory
information?
A. The date the inventory is taken.
B. The current price of the items.
C. Inventory I.D. numbers.
D. Quantities.
Answer. D

ISM dump   630-007시험문제   630-007 pdf   630-007 pdf   630-007자료   630-007