ITExamDump의 IBM인증 C2080-470덤프는 거의 모든 실제시험문제 범위를 커버하고 있습니다.IBM인증 C2080-470시험덤프를 구매하여 덤프문제로 시험에서 불합격성적표를 받을시ITExamDump에서는 덤프비용 전액 환불을 약속드립니다.
지금 같은 상황에서 몇년간IBM C2080-470시험자격증만 소지한다면 일상생활에서많은 도움이 될것입니다. 하지만 문제는 어떻게IBM C2080-470시험을 간단하게 많은 공을 들이지 않고 시험을 패스할것인가이다? 우리ITExamDump는 여러분의 이러한 문제들을 언제드지 해결해드리겠습니다. 우리의C2080-470시험마스터방법은 바로IT전문가들이제공한 시험관련 최신연구자료들입니다. 우리ITExamDump 여러분은C2080-470시험관련 최신버전자료들을 얻을 수 있습니다. ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.
ITExamDump에서는 소프트웨어버전과 PDF버전 두가지버전으로 덤프를 제공해드립니다.PDF버전은 구매사이트에서 무료샘플을 다움받아 체험가능합니다. 소프트웨어버전은실력테스트용으로 PDF버전공부후 보조용으로 사용가능합니다. IBM 인증C2080-470덤프 무료샘플을 다운받아 체험해보세요.
만약 시험만 응시하고 싶으시다면 우리의 최신IBM C2080-470자료로 시험 패스하실 수 있습니다. ITExamDump 의 학습가이드에는IBM C2080-470인증시험의 예상문제, 시험문제와 답 임으로 100% 시험을 패스할 수 있습니다.우리의IBM C2080-470시험자료로 충분한 시험준비하시는것이 좋을것 같습니다. 그리고 우리는 일년무료 업데이트를 제공합니다.
시험 번호/코드: C2080-470
시험 이름: IBM (IBM Unica Campaign V8.5)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 108 문항
업데이트: 2014-04-02
많은 사이트에서도 무료IBM C2080-470덤프데모를 제공합니다.우리도 마찬가지입니다.여러분은 그러한IBM C2080-470데모들을 보시고 다시 우리의 덤프와 비교하시면 ,우리의 덤프는 다른 사이트덤프와 차원이 다른 덤프임을 아시될것입니다, 우리ITExamDump에서 제공되는 덤프는 100%보장 도를 자랑하며,여러분은 시험패스로 인해 성공과 더 가까워 졌답니다
C2080-470 덤프무료샘플다운로드하기: http://www.itexamdump.com/C2080-470.html
NO.1 The custom macro has been configured to select on "audience id" and a return value. When this custom
macro is executed an error is received. What could cause this problem?
A. There are user variables used in the custom macro.
B. The Expression Type is configured incorrectly for the custom macro.
C. The custom macro is the same as one of the Campaign built-in macros.
D. The custom macro is too large for the fields in the temp table (<TempTable>).
Answer: B
IBM dumps C2080-470 C2080-470
NO.2 A user is mapping a flat file into Unica Campaign. The user needs to ensure that the file ends with a:
A. tab.
B. comma.
C. closing bracket.
D. carriage return, line feed.
Answer: D
IBM인증 C2080-470시험문제 C2080-470 C2080-470덤프
NO.3 In a Unica Campaign Flowchart, a customer database table (see below) is mapped in a Select process
box. There is a requirement to segment and organize customers based on their income, which would
typically have the values "HIGH" for customers whose income is greater than 100000 and "LOW" for
customers whose income is less than or equal to 100000. This value needs to be output with the final
target list.
Ideally which step should be executed to get the task done?
A. Alter the table to add a new column with the required logic.
B. Create a Persistent Derived field with the logic : IF(Customer_Demographic_Info.Income >
100000,'HIGH','LOW').
C. Create a Strategic Segment with the logic : IF(Customer_Demographic_Info.Income >
100000,'HIGH','LOW').
D. Create a User Variable HIGH and LOW with the logic: IF(Customer_Demographic_Info.Income >
100000,'HIGH','LOW').
Answer: B
IBM덤프 C2080-470 C2080-470 C2080-470인증 C2080-470 pdf
NO.4 A user needs to output data from a Unica Campaign flowchart and does not need to utilize the data
within the flowchart. This can be done by creating and outputting the data to a:
A. fact table.
B. general table.
C. dimension table.
D. base record table.
Answer: B
IBM C2080-470 C2080-470덤프 C2080-470
NO.5 Within a flowchart a user wants to switch audiences from the Household level to the Customer level. In
order to do this, a table containing both columns is necessary. This can be accomplished by mapping a
table:
A. into the catalog twice, once at the Household level and once at the Customer Level.
B. into the catalog and select the Household column and the Customer column when selecting the
audience level.
C. in as a base table at the Household level and then map the same table in as a dimension table joined
to the base table on the Customercolumn.
D. in at the Household level as a table is normally mapped and then use the "Specify Additional
Audiences" screen to select the Customer columnwithin the table.
Answer: D
IBM C2080-470 C2080-470덤프 C2080-470
NO.6 In Unica Campaign, how are the Scheduler and Schedule process used?
A. The Schedule process is used to configure the Campaign Scheduler. This enables the use of the
Schedule process in a flowchart.
B. The Scheduler is an administration tool used to configure schedules. Use the Schedule process to
select the schedule to use as part of theflowchart.
C. The Scheduler is a Marketing Platform function that defines Schedule process attributes. The
Schedule process is used to initiate a process,series of processes, or an entire flowchart.
D. The Scheduler starts a flowchart even if it is not running, while the Schedule process in a flowchart
works only if the flowchart is running. TheScheduler should not be used to schedule a flowchart that uses
the Schedule process.
Answer: D
IBM C2080-470 dumps C2080-470자료 C2080-470자료 C2080-470
NO.7 A specialist is responsible for making sure that Unica Campaign flowcharts run successfully. If an error
occurs, the specialist needs to be informed by email. Therefore, the specialist creates a batch script which
interacts with the mail server and sends an email to the IT department helpdesk to be informed in case
problems arise in a Campaign flowchart. Where can the specialist best relate to this script from within the
Campaign flowchart? The specialist creates an outbound trigger, invokes the batch script in the trigger,
and:
A. assigns a trigger in a mail list or call list process.
B. schedules a trigger to run on a case-by-case basis.
C. uses the eMessage process to send out these emails.
D. assigns it in the Advanced settings section on the Campaign flowchart and has the trigger run on
Flowchart Run Error.
Answer: D
IBM pdf C2080-470 C2080-470 C2080-470 C2080-470
NO.8 Which of the following is NOT true about how a user variable can be used in Unica Campaign?
A. A user variable can be used in a custom macro.
B. A user variable can be used in an outbound trigger.
C. A user variable can be used within a SQL statement.
D. A user variable can be defined in one flowchart and then referenced in another flowchart.
Answer: D
IBM덤프 C2080-470최신덤프 C2080-470 C2080-470 C2080-470 pdf
NO.9 A user is trying to create RAW SQL in a Select process. "Select IDs with" is selected but when the user
clicks on the advanced button the "RAW SQL for Record Selection" check box is greyed out. What is the
user doing wrong?
A. The correct tables are not mapped in.
B. A SQL Custom Macro has not been created.
C. The Select process is in Point and Click mode.
D. Unica Campaign is not connected to the database.
Answer: C
IBM C2080-470기출문제 C2080-470인증 C2080-470
NO.10 A user is designing a Campaign flowchart. The user wants to retrieve and use a derived field which
was saved in a previous Campaign. Which of the steps below is correct to achieve this task?
A. The user cannot retrieve derived field expressions saved in other Campaigns.
B. Search the previous Campaign and copy the required derived field expression.
C. Retrieve the expression from the Stored Derived fields directory from the Options menu.
D. Retrieve the expression from the Stored Derived fields directory in a Select process box.
Answer: D
IBM C2080-470 dump C2080-470 C2080-470 dumps
NO.11 In a Unica Campaign flowchart Select process, how can a custom macro be profiled so that it appears in
the Select process "Available Fields" menu?
A. Select "Options" from the main menu in a flowchart, choose "Custom Macros...". Click "New Item" and
add the macro name and field expression.Go to the "Select" process and choose the macro from the
"Available Fields" column.
B. Select "Options" from the main menu in a flowchart, choose "Custom Macros...". Click "New Macro"
and add the macro name and fieldexpression. Go to the "Select" process and choose the macro from the
"Available Fields" column.
C. In the "Select" process box, create a "Derived Field" with a field name Profile_Test and enter the macro
name in the expression field. Go tothe "Select" process "Source" tab and select the macro from the
"Available Fields" column.
D. In the "Select" process box "Source" tab, click the Input field and the drop-down list appears. Go to
"Tables", select "UA_CUSTOMMACROS",and select the macro from the list. Select the macro when it
appears in the "Available Fields" column.
Answer: C
IBM C2080-470 C2080-470시험문제 C2080-470 C2080-470자격증
NO.12 A user has added a new Unica Campaign Attribute and would like to make that attribute available to the
Cognos reports. To do this, the user needs to:
A. use the Reports SQL generator to update the existing reporting views.
B. use the Reports SQL generator to create new views which include the new attribute.
C. do nothing, once the new column is added the reports model is automatically updated.
D. use the Cognos application administrator to create a new data framework which includes the new
attribute.
Answer: B
IBM인증 C2080-470인증 C2080-470 C2080-470 C2080-470
NO.13 A user would like to create a 10% holdout control group from a Cell which contains 1000 Audience IDs.
Which Unica Campaign flowchart process box is the BEST way to accomplish this?
A. Merge process
B. Sample process
C. Segment process
D. Snapshot process
Answer: B
IBM인증 C2080-470 dumps C2080-470 C2080-470 dump C2080-470
NO.14 A specialist creates a numeric user variable called MinBalance and assigns an initial value of 100 to it.
The specialist wants the Select process to return all IDs where the mapped field AccountBalance is
greater than MinBalance. What is the correct syntax to use?
A. MinBalance < AccountBalance
B. AccountBalance > MinBalance
C. AccountBalance > UserVar.MinBalance
D. AccountBalance is GT than UserVar.MinBalance
Answer: C
IBM C2080-470 dumps C2080-470
NO.15 A table Customer_master contains 1000 customer_ids. A select box was created and all the
customer_ids from the table were selected. However, when the select box was run, the output cell
contained only a fraction of the total customers. When a test query was performed in the above
mentioned select box, all 1000 customers were selected. What could be cause of this issue?
A. Global suppression.
B. The Select process was not configured properly.
C. The table mapping of Customer_master are out-of-date.
D. Incorrect audience level has been chosen for the Customer_master table.
Answer: A
IBM덤프 C2080-470덤프 C2080-470시험문제 C2080-470
ITexamdump의 NS0-156덤프의 VCE테스트프로그램과 VCP5-DCV덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 300-208시험에 대비한 고품질 덤프와 HP0-J61시험 최신버전덤프를 제공해드립니다. 최고품질 MB7-702시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기