ITExamDump 의 Alcatel-Lucent인증 4A0-101덤프는Alcatel-Lucent인증 4A0-101시험에 도전장을 던진 분들이 신뢰할수 있는 든든한 길잡이 입니다. Alcatel-Lucent인증 4A0-101시험대비 덤프뿐만아니라 다른 IT인증시험에 대비한 덤프자료도 적중율이 끝내줍니다. Alcatel-Lucent인증 4A0-101시험이나 다른 IT인증자격증시험이나ITExamDump제품을 사용해보세요.투자한 덤프비용보다 훨씬 큰 이득을 보실수 있을것입니다.
ITExamDump의Alcatel-Lucent인증 4A0-101시험덤프 공부가이드는 시장에서 가장 최신버전이자 최고의 품질을 지닌 시험공부자료입니다.IT업계에 종사중이라면 IT자격증취득을 승진이나 연봉협상의 수단으로 간주하고 자격증취득을 공을 들여야 합니다.회사다니면서 공부까지 하려면 몸이 힘들어 스트레스가 많이 쌓인다는것을 헤아려주는ITExamDump가 IT인증자격증에 도전하는데 성공하도록Alcatel-Lucent인증 4A0-101시험대비덤프를 제공해드립니다.
시험 번호/코드: 4A0-101
시험 이름: Alcatel-Lucent (Alcatel-Lucent Interior Routing Protocols and High Availability)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 177 문항
업데이트: 2014-04-09
ITExamDump 는 아주 우수한 IT인증자료사이트입니다. 우리ITExamDump에서 여러분은Alcatel-Lucent 4A0-101인증시험관련 스킬과시험자료를 얻을수 있습니다. 여러분은 우리ITExamDump 사이트에서 제공하는Alcatel-Lucent 4A0-101관련자료의 일부분문제와답등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 그리고ITExamDump에서는Alcatel-Lucent 4A0-101자료구매 후 추후 업데이트되는 동시에 최신버전을 무료로 발송해드립니다. 우리는Alcatel-Lucent 4A0-101인증시험관련 모든 자료를 여러분들에서 제공할 것입니다. 우리의 IT전문 팀은 부단한 업계경험과 연구를 이용하여 정확하고 디테일 한 시험문제와 답으로 여러분을 어시스트 해드리겠습니다.
만약 아직도Alcatel-Lucent 4A0-101시험패스를 위하여 고군분투하고 있다면 바로 우리 ITExamDump를 선택함으로 여러분의 고민을 날려버릴 수 잇습니다, 우리 ITExamDump에서는 최고의 최신의 덤프자료를 제공 합으로 여러분을 도와Alcatel-Lucent 4A0-101인증자격증을 쉽게 취득할 수 있게 해드립니다. 만약Alcatel-Lucent 4A0-101인증시험으로 한층 업그레이드된 자신을 만나고 싶다면 우리ITExamDump선택을 후회하지 않을 것입니다, 우리ITExamDump과의 만남으로 여러분은 한번에 아주 간편하게Alcatel-Lucent 4A0-101시험을 패스하실 수 있으며,Alcatel-Lucent 4A0-101자격증으로 완벽한 스펙을 쌓으실 수 있습니다,
ITExamDump는 아주 믿을만하고 서비스 또한 만족스러운 사이트입니다. 만약 시험실패 시 우리는 100% 덤프비용 전액환불 해드립니다.그리고 시험을 패스하여도 우리는 일 년 동안 무료업뎃을 제공합니다.
IT업종 종사자분들은 모두 승진이나 연봉인상을 위해 자격증을 취득하려고 최선을 다하고 계실것입니다. 하지만 쉴틈없는 야근에 시달려서 공부할 시간이 없어 스트레스가 많이 쌓였을것입니다. ITExamDump의Alcatel-Lucent인증 4A0-101덤프로Alcatel-Lucent인증 4A0-101시험공부를 해보세요. 시험문제커버율이 높아 덤프에 있는 문제만 조금의 시간의 들여 공부하신다면 누구나 쉽게 시험패스가능합니다.
4A0-101 덤프무료샘플다운로드하기: http://www.itexamdump.com/4A0-101.html
NO.1 Click the exhibit button.
A static route is created on router R1, using the "static-route 0.0.0.0/ 0 next-hop 10.3.3.2"
command. What command can be used to test the static route on an Alcatel-Lucent 7750 SR?
A. ping static 10.5.5.5
B. ping static 0.0.0.0/ 0
C. ping 10.5.5.5
D. ping 0.0.0.0
Answer: C
Alcatel-Lucent 4A0-101 dumps 4A0-101 4A0-101 4A0-101 dumps
NO.2 There is an IP host with IP address 10.2.3.1. A static route is created, using the "configure
router static-route 10.2.3.0/ 24 next-hop 10.1.2.1" command. What is the correct traceroute
command to test this static route on an Alcatel-Lucent 7750 SR?
A. traceroute 10.2.3.1
B. traceroute 10.2.3.1 next-hop 10.1.2.1
C. traceroute next-hop 10.1.2.1
D. traceroute does not work on the Alcatel-Lucent 7750 SR.
E. traceroute 10.1.2.1
Answer: A
Alcatel-Lucent 4A0-101 4A0-101 dump 4A0-101자격증
15. What is the default preference value for a static route in the Alcatel-Lucent 7750 SR?
A. 0
B. 5
C. 10
D. 15
Answer: B
Alcatel-Lucent 4A0-101 dumps 4A0-101
16. Which of the following statements regarding distance vectors protocols are true? (Choose
two answers).
A. RIPvl, RIPv2, and BGP are distance vector protocols.
B. OSPF and IS-IS are distance vector protocols.
C. Routing tables are exchanged between neighbors; however, no routing table is transmitted
beyond the immediate neighbor.
D. Distance vector protocols use the Dijkstra SPF algorithm.
E. Routers that participate in distance vector routing protocols maintain full knowledge of distant
routers and how they interconnect
Answer: A,C
Alcatel-Lucent덤프 4A0-101 dumps 4A0-101시험문제
NO.3 In an IP datagram, which of the following fields identifies the receiving application?
A. The protocol field of the transport layer header.
B. The port field of the transport layer header.
C. The protocol field of the network layer header.
D. The port field of the network layer address.
Answer: B
Alcatel-Lucent 4A0-101인증 4A0-101시험문제
NO.4 Which of the following commands can be used to display the number of SPF computations
that have been performed on a router?
A. show router ospf area <area-id>
B. show router ospf neighbor
C. show router ospf interface
D. show router ospf status
Answer: A
Alcatel-Lucent기출문제 4A0-101 4A0-101자격증 4A0-101
NO.5 What are the default Hello and Dead timer intervals for OSPF on the Alcatel-Lucent 7750 SR?
A. 5 and 15 seconds
B. 10 and 30 seconds
C. 5 and 20 seconds
D. 10 and 40 seconds
Answer: D
Alcatel-Lucent덤프 4A0-101 4A0-101시험문제 4A0-101 4A0-101
NO.6 Which of the following statements describe the major features of OSPF? Choose two answers.
A. Fast reroute capability
B. Control traffic prioritization
C. Route redistribution
D. Traffic engineering extensions
E. Cut through forwarding
Answer: C,D
Alcatel-Lucent pdf 4A0-101최신덤프 4A0-101 dumps
NO.7 What causes an adjacency to change from down to two ways?
A. When a link state update is received in response to a link state request.
B. When a router receives a Hello packet that contains its own router ID in the neighbor list from a
neighbor.
C. When a router receives a database description packet from a neighbor.
D. When a link state acknowledgement is received in response to a link state update.
Answer: B
Alcatel-Lucent 4A0-101덤프 4A0-101
NO.8 Click the exhibit button.
What triggers convergence of the routing protocol when the link between switch 1 and switch 2
goes down?
A. Convergence is triggered when the adjacency between routers R1 and R2 drops as a result of
Hello timeouts. At this point, both routers R1 and R2 re-compute their link state database and send
updates to their adjacent routers. Once the process is complete for all routers, the networks have
converged.
B. Convergence is triggered when the physical interfaces between routers R1 and R2 go down. At
this point, both routers R1 and R2 re-compute their link state database and send updates to their
adjacent routers. Once the process is complete for all routers, the networks have converged.
C. Convergence will not be triggered because switches cannot run routing protocols between them.
D. Convergence is triggered when the switches notify the routers about the link state information.
At this point, both routers R1 and R2 re-compute their link state database and send updates to their
adjacent routers. Once the process is complete for all routers, the networks have converged
E. Convergence is triggered when an LSA is sent from router R1 to router R2 to indicate that the link
is down. At this point, both routers R1 and R2 re-compute their link state database and sendupdates
to their adjacent routers. Once the process is complete for all routers, the networks have converged.
Answer: A
Alcatel-Lucent pdf 4A0-101기출문제 4A0-101덤프 4A0-101
NO.9 When a router receives an IP packet, but does not find a match in the routing table for the
destination IP address, what actions are performed by the router?
A. The packet is flooded out all router interfaces.
B. The packet is dropped and an ICMP unreachable message is sent back to the source.
C. The packet is silently discarded.
D. The packet is flooded out all interfaces and an ICMP unreachable message is sent.
Answer: B
Alcatel-Lucent 4A0-101 4A0-101시험문제 4A0-101최신덤프
NO.10 Click the exhibit button.
What is the command to configure a static route on the Alcatel-Lucent 7750 SR router R1 to reach
the network behind router R2?
A. configure router static-route 139.120.121.0/ 24 next-hop 138.120.199.2
B. configure router static-route 139.120.121.0/ 24 next-hop 138.120.199.1
C. configure router static-route 138.120.199.2 / 24 next-hop 138.120.199.1
D. configure router static-route 139.120.121.0/ 24 next-hop 139.120.121.2
Answer: A
Alcatel-Lucent 4A0-101 4A0-101덤프 4A0-101인증 4A0-101
NO.11 Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. Assuming
that there are no stub networks, which of the following statements regarding type 4 LSA generation
is true?
A. Router R1 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
B. Router R3 generates a type 4 LSA that is flooded to areas 0, 1, and 2.
C. Router R3 generates a type 4 LSA that is flooded to areas 0 and 2.
D. Router R3 generates a type 4 LSA that is flooded to area 0, and router R6 generates a type 4 LSA
that is flooded to area 2.
Answer: D
Alcatel-Lucent 4A0-101 4A0-101 4A0-101
NO.12 Click the exhibit button.
Routers R1, R2, and R3 are running a classful routing protocol between them. Assuming that router
R1 advertises all directly connected networks, how will these networks be represented in router
R3's routing table?
A. Router R3's routing table can only contain one of the routes, which will result in route flapping.
B. Router R3's routing table will have one entry for 10.1.1.0/ 24 and one entry for 10.1.2.0/ 24.
C. The networks will be represented with one entry of 10.0.0.0/ 8 in router R3's routing table.
D. The networks will be represented with one entry of 10.0.0.0/ 24 in router R3's route table.
Answer: C
Alcatel-Lucent최신덤프 4A0-101 4A0-101
NO.13 Static routing will be used in a network between a corporate head office, with many
connected networks, and a branch office, with one connection to the head office. Which of the
following best describes the likely configuration?
A. The corporate head office router will have a default route and the branch site will have a more
specific static route.
B. The corporate head office router and the branch office router will both have specific static routes.
C. The corporate head office router and the branch router will both have default routes.
D. The corporate head office router will have a more specific static route and the branch office
router will have a default route.
Answer: D
Alcatel-Lucent 4A0-101자료 4A0-101 4A0-101 dump
NO.14 Which of the following statements apply to link state protocol behavior? Choose three
answers.
A. Routers broadcast the entire route table to all neighbors.
B. Information about directly connected links is sent to all neighbors.
C. An adjacency database is maintained by each router.
D. The sequence number for an update is incremented as it is flooded from router to router.
E. The topological database is the same for all routers in a single area.
Answer: B,C,E
Alcatel-Lucent자료 4A0-101 4A0-101
ITexamdump의 MB6-870덤프의 VCE테스트프로그램과 EX0-118덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 700-505시험에 대비한 고품질 덤프와 MB2-701시험 최신버전덤프를 제공해드립니다. 최고품질 1Z0-466시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기